DSS Packaging

[fivefive1978]

Question about the packaging of the DSS.

I have an older supermicro server that I want to use: http://www.supermicro.com/products/system/1U/6012/SYS-6012P-8.cfm

I'm not certain that these servers will boot off of a USB device. Is there a way to get the DSS product on to an IDE flash based device like the iSCSI and NAS products offer? (perhaps using dd on another linux box)

I am certain that the USB header on the motherboard won't plug straight in so I'll have to use the USB extension cable.

[To-M]

We work well with Supermicro MB, we don't have this one in our labs but if there is USB pins on the motherboard - then yes use the Internal USB cable that comes free with our products. Incase there is no USB headers on the motherboard we have an External USB cable part# 1482. If the BIOS see's the PQI DOM this should work. Currently we do not have any way to load the new R-3 family and DSS onto the IDE DOM because of the size issue IDE is 256MB and USB is 1GB and there is a totally different boot structure. On our FTP site we have a USB BOOT ISO to assist the USB DOM incase of BIOS not assisting the boot from the USB DOM.

[MBR]

On our FTP site we have a USB BOOT ISO to assist the USB DOM incase of BIOS not assisting the boot from the USB DOM.

How can I download this ISO-Image? My RioWorks mainboard will not boot from USB and we have the iSCSI-Enterprise IDE DOM changed in the DSS USB DOM.
I have tested bootfloppy with ldlinux.sys and so on. All failed.

Martin

[To-M]

Just sent you an email :)

[hussien_kijo]

How can I download this ISO-Image?



How can I download this ISO-Image? My RioWorks mainboard will not boot from USB and we have the iSCSI-Enterprise IDE DOM changed in the DSS USB DOM.
I have tested bootfloppy with ldlinux.sys and so on. All failed.

Martin

[hussien_kijo]

plz can you send the link to me
with best regard
Just sent you an email :)