What is the latest version of NAS 2.0

[rkoelewijn]

I have a NAS 2.0 module with;

Model: Open-E NAS
Version: 2.67.000000000.1711
Release date: 2006-03-24

But looking at the updates, they are all older.

[rkoelewijn]

I'm asking this because i have the following (i think) hardware driver related problems;

1) During booting i get the following messages;

Loading...
PCI: Unable to handle 64-bit address space for
PCI: Unable to handle 64-bit address space for device 03:01.0
PCI: Unable to handle 64-bit address space for
PCI: Failed to allocate resource 0(0-0) for device 03:01.0

Moving the 3Ware 9550SX to another PCI-X bus changes the "device 03:01.0" to device 03:02.0)

2) When booted and i'm logged in the web interface going to status->hardware i see at controller info;

RAID/SCSI controllers
3ware Inc: Unknown device 1003

3) When there is no raid config created the controller is not recognized and the 3DM tools are not available. When a raid config is created in the bios the controlller is recognized and the tools are available.

My server hardware configuration is;

Intel Entry Server Board SE7221BK1-E mainboard (bios version P07) with 1Gb ram and a Celeron D 2.66Ghz CPU
3Ware 9550SX-8LP controller (version 9.3.0.3)

[To-M]

A more recent version is located below. Please go to FTP site to download updated ISO. Please read all instructions on how to update the NAS 2.0.

ftp.open-e-com
user: software
pass: enterforupdate

ftp://support:enterforupdate@ftp.open-e.com

or

ftp://ftp.open-e.com/NAS%202.0/black_sdom/image_v1.06_nas-sbmb_v268_b1877/

[To-M]

Are you receiving the PCI error messages after POST and before the Open-E Screen appears?

If you create a RAID set from the 3Ware controller are you able to see in Disk Manager the assigned VG0? If you are can you then create a LV00 and access the Share?

[rkoelewijn]

I'm receiving the PCI error messages after POST and before progress bar. When I create a raid set. I'm able to see the assigned VG0. I can create a LV and create the share. Also the 3DM tools are available.

[rkoelewijn]

After updating to 2.68... I get the following during boot;

Loading...
PCI: Failed to allocate resource 0(0-0) for device 03:01.0

It looks like the error details are less.

[To-M]

To better help you could you send the logs to support@open-e.com.

[rkoelewijn]

I will send the logs