Visit Open-E website
Results 1 to 9 of 9

Thread: WARNING: Low space! ( < 2 MB )

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1

    Default Same Problem

    Quote Originally Posted by masim
    mmm...

    Remove the logs fromt he GUI... that will be in the hardware tab...

    Also, try to add additional Gig of RAM...
    System:WARNING: Low space! ( < 2 MB ). Please contact with the support

    We're in the same boat here. We have 1 GB ram on our NAS server using DSS Lite. We removed the logs from the GUI rebooted the system and sure enough 20 mins later we had the same error message. As an addition, we were having a lot of error messages concerning virii alerts, after disabling the virus scanner we started getting the 2 MB or less messages.

    We have 2 volumes, 1 has 160+ GB free the other has 13+ GB free. Memory doesn't seem to be an issue, of the 1 GB 300 MB was in use 640 MB was system cache and the remaining 60 MBs or so indicated it was free mem.

    What memory does this error message refer to? The USB DOM is a 2 GB, we have 1 GB RAM, and tons of available disk space.

    Any help would be great...

  2. #2

    Exclamation Caveat

    Just FYI folks.

    Unless you have put the new RAM in your NAS. Don't delete the logs and restart.
    Causes bad network issues. Re: http://forum.open-e.com/showthread.php?t=1026

    After my colleague restored the DOM from a backup he tried deleting the logs and rebooting. NO NETWORK. The network controllers failed to initialize. They're still there...just don't work. We restored the DOM from backup threw an extra 512Mb of RAM in the NAS. Et voila! Working again. We have another 512Mb on order, and with 2 GB hopefully won't have any more issues.

  3. #3

    Default

    How much free space do you have on your disks?

  4. #4

    Red face Fingers Crossed

    Quote Originally Posted by symm
    How much free space do you have on your disks?
    Well, we have 500 Gigabytes of Disk space. Only 300 GB are partitioned ATM, the problem was fixed when we upped the RAM in the system to 2 GB, and restored the USB DOM from a previous backup. Of the two volumes on the partition, one has 160GB remaining, the other has 13GB.

    Hopefully it keeps running

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •