Visit Open-E website
Results 1 to 6 of 6

Thread: Problemts after Updating

  1. #1

    Default Problemts after Updating

    Hello guys,


    today i perform a update to n20081119s.149_b3278.dss-bas.generic.iso, after this i get the following (error) message:

    An incorrect system structure has been detected. This may cause errors and system instability. Please perform an update to a correct system image (NAS-R3).
    i do the update a second time, but the error is still there.

    br,

    Martin

  2. #2

    Default

    Dear tpk,

    What version you were using before the 5.0_49_3278?
    Please, check your ISO image with the md5? Or download a new ISO image from the web site.

    http://www.open-e.com/account/products-and-updates/

    Regards,
    SJ

  3. #3

    Default

    Thanks for your answer, now i dont get the webinterface, i can ping the NAS and view it over the VGA Interface but the webinterface doesnt answer...

  4. #4

    Default

    ok, now the webinterface response, i get some new error messages:


    2008/12/09 00:33:35 Pid: 6740, comm: kjournald Not tainted 2.6.25.13-oe32 #61

    2008/12/09 00:33:35 [] warn_on_slowpath+0x3e/0x60

    2008/12/09 00:33:35 [] vsnprintf+0x30d/0x550

    2008/12/09 00:33:35 [] call_console_drivers+0x74/0x100

    2008/12/09 00:33:35 [] release_console_sem+0x92/0xa0

    2008/12/09 00:33:35 [] __wait_on_bit+0x59/0x70

    2008/12/09 00:33:35 [] sync_buffer+0x0/0x40
    2008/12/09 00:33:35 [] sync_buffer+0x0/0x40

    2008/12/09 00:33:35 [] out_of_line_wait_on_bit+0x8c/0xa0

    2008/12/09 00:33:35 [] mark_buffer_dirty+0x96/0xa0

    2008/12/09 00:33:35 [] __journal_unfile_buffer+0x8/0x20

    2008/12/09 00:33:35 [] journal_refile_buffer+0x26/0x60

    2008/12/09 00:33:35 [] journal_commit_transaction+0x6d2/0x950

    and so on...

    there a 3 pages with erros, any idea?

  5. #5

    Default

    now i checked the md5, this is OK, the version before, i think it was this one: 2007-09-27 v.2.32 b.2863


    greets,

  6. #6

    Default

    I would try to flash the USB module with ISO from CD-ROM.
    All the best,

    Todd Maxwell


    Follow the red "E"
    Facebook | Twitter | YouTube

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •