-
NT Server Domain not found error
Hi,
We have been using E-NAS for alomost 4 years now, initially we had a lot of problems because of the Domain Server being NT, but once we upgraded the firmware we had a smooth run.
Off late the NAS box has been behaving strangely, it went out of the domain several times, the domain is still NT, each time we restarted the NAS box and it worked ok, yesterday evening it went off and we can't join it back to the domain, we tried all the methods, repeatedly, its more than 12 hours now that we have been trying.
Somebody please advice on what to do now. We removed the NAS from Server Manager, restarted the NT server, restarted NAS, added it back to the domain, again restarted the NAS, but still it says can't find Domain controller. we can ping, we get the web UI etc...
waiting for responses....
Ananth
-
Ok - Here we go - Let's get you up and going. I need you to fill in the blanks.
Is DNS ok - for the Domain and the NAS Server - ping by name on both?
Was there a change in the Domain Server - add or check to see if there is a reverse address record for the NAS Server
Try changing to PDC then back to ADS or unless this a PDC
Re-set the Domain password on the Windows server - go to the users names and find the admin name right click then change password - then enter the password again into the NAS Server.
Please check all time zones and time setting.
All the best,
Todd Maxwell
-
Thanks for the Quick reply Todd.
Its Windows NT Server, there is no DNS Server in that Domain.
How do I reverse check?
We did try changing to ADS and back to PDC but no hope..
We'll reset the Domain password and let you know in 10 mins.
It was working fine there was no apparent major setting changes, so can't figure out why the problem came up.
Anyway a million thanks for suggesting all these....
-
Send the logs to support@open-e.com and I will take a look at them. Is your DNS server on the Windows system?
All the best,
Todd Maxwell
-
Dear Todd.
We re-set he Domain administrator password and now its working FINE!
THANKS A LOT, TODD!
Your help is much appreciated....
Best regards
Ananth :-)
-
If I am up and doing nothing then I would rather help an engineer get off the technical island.
Trust me I know what it is all about I was there many years ago. We are always here to help.
All the best,
Todd Maxwell
-
Dear Todd,
I had send a mail to you and attached our log file. Hope you have recieved it. The storage is working fine now, hope it stays up like that.
Any ideas on what could have caused this sudden break down?
Again a big Thank you from all ouf our Technical Team here 
best regards
Ananth.
-
One of the support engineers will be reviewing this. Thanks for the reply.
All the best,
Todd Maxwell
-
Adding to Windows 2003 domain
Hi Todd,
We still have the earlier said problem, but the last time it happened was when the NAS box got completely full! now we are monitoring it closely.
Another issue, we are migrating to windows 2003 server and Active Directory in a couple of weeks time, can you please guide us through the process. When the earlier said issue occured we had tried to join the NAS box to another windows 2003 based network, but got a lot of errors, so we would like to have a complete step by step procdure before starting on it.
regards
Ananth.
-
This procedure is the same, when changing from your PDC environment select ADS with all ADS server information Password and Username. Please make sure DNS, Server Time on both systems are set properly. Also remember ADS uses Kerberos (Please review Microsoft Kerberos documentation) please check all Kerberos in your Windows server and review any ticket or life of tickets, this is located in the GPO of your Windows server (please review your Windows documentation). Also add the NAS computer in you ADS and make sure all your users are trusted. If you are still experiencing any issues please send logs to support@open-e.com
All the best,
Todd Maxwell
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules