Visit Open-E website
Results 1 to 2 of 2

Thread: Adaptec Problem

  1. #1

    Default Adaptec Problem

    Hi,
    we use an adaptec 51245 RAID controller in DSS V6 b4452. I wanted to access the controller via cli either from ssh or from the console. I go to the RAID Manager (C-A-R). It shows me Adaptec Raid, which I choose. But neither aacli nor ucli I can find a controller. It is always telling me, 0 controllers found. Through ASM it is working ok, beside of the fact, that newer linux drivers would be nice. I am able to basically use it, but cli is not working. Has anyone an idea. Because some settings arenīt very easy with ASM. Or I need to shut down the system and use ACU.

    The firmware version is 5.2-0 17899
    The driver version is 1.1-5 2456

    Does anyone has an idea what to do?

    Thank you!

    Jens

  2. #2

    Default

    except NCQ all problems are solved with b4786 update

    Thanks a lot open-e developers

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •