Visit Open-E website
Results 1 to 10 of 10

Thread: Not seeing Volume Group or Shares

  1. #1

    Default Not seeing Volume Group or Shares

    I have a couple issues. First issue, the Open-E web client/Volume Manager is not seeing a volume that the it was previously connected to. The RAID unit for that volume is working fine. Second issue, there is a second volume group with a share set up that was previously working. Now, none of those shares are accessable on the network.

  2. #2

    Default

    What type of RAID controller? Any logs from the RAID controller showing any alerts? Even if the RAID is fine it could surface up later.
    Check the critical error logs to see if there are any errors. You can post them here. The log is located in Status > Hardware > log then click on the Download button and use something WinRAR to open them to look at the dmesg2 and critical error log.
    All the best,

    Todd Maxwell


    Follow the red "E"
    Facebook | Twitter | YouTube

  3. #3

    Default

    It's a 3ware 3DM2 9650SE-16ML card.
    There are no errors at all from the RAID card.
    The critical error log is empty.
    The dmesg.2 file is too big to post here.

  4. #4
    Join Date
    Oct 2010
    Location
    GA
    Posts
    935

    Default

    I have a couple issues. First issue, the Open-E web client/Volume Manager is not
    seeing a volume that the it was previously connected to
    What does it say on screen? 'no system volume found' ?

    Second issue, there is a second volume group with a share set up that was previously working. Now, none of those shares are accessable on the network
    fix the first issue, and this will likely solve itself.
    Follow the red "E"
    Facebook | Twitter | YouTube

  5. #5

    Default

    The dmesg.2 file just look for any Call Trace or Journal IO errors or any other that may look to be an issue near the mid to last part of the dmesg.2 file
    All the best,

    Todd Maxwell


    Follow the red "E"
    Facebook | Twitter | YouTube

  6. #6

    Default

    scsi 1:0:0:0: Direct-Access AMCC 9650SE-16M DISK 4.06 PQ: 0 ANSI: 5
    sd 1:0:0:0: [sdb] Very big device. Trying to use READ CAPACITY(16).
    sd 1:0:0:0: [sdb] 9765519360 512-byte hardware sectors (4999946 MB)
    sd 1:0:0:0: [sdb] Write Protect is off
    sd 1:0:0:0: [sdb] Mode Sense: 23 00 00 00
    sd 1:0:0:0: [sdb] Write cache: enabled, read cache: disabled, doesn't support DPO or FUA
    sd 1:0:0:0: [sdb] Very big device. Trying to use READ CAPACITY(16).
    sd 1:0:0:0: [sdb] 9765519360 512-byte hardware sectors (4999946 MB)
    sd 1:0:0:0: [sdb] Write Protect is off
    sd 1:0:0:0: [sdb] Mode Sense: 23 00 00 00
    sd 1:0:0:0: [sdb] Write cache: enabled, read cache: disabled, doesn't support DPO or FUA
    sdb: unknown partition table
    sd 1:0:0:0: [sdb] Attached SCSI disk
    scsi 1:0:1:0: Direct-Access AMCC 9650SE-16M DISK 4.06 PQ: 0 ANSI: 5
    sd 1:0:1:0: [sdc] Very big device. Trying to use READ CAPACITY(16).
    sd 1:0:1:0: [sdc] 23437369344 512-byte hardware sectors (11999933 MB)
    sd 1:0:1:0: [sdc] Write Protect is off
    sd 1:0:1:0: [sdc] Mode Sense: 23 00 00 00
    sd 1:0:1:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
    sd 1:0:1:0: [sdc] Very big device. Trying to use READ CAPACITY(16).
    sd 1:0:1:0: [sdc] 23437369344 512-byte hardware sectors (11999933 MB)
    sd 1:0:1:0: [sdc] Write Protect is off
    sd 1:0:1:0: [sdc] Mode Sense: 23 00 00 00
    sd 1:0:1:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
    sdc: unknown partition table
    sd 1:0:1:0: [sdc] Attached SCSI disk
    Loading iSCSI transport class v2.0-869.
    iscsi: registered transport (tcp)
    Ethernet Channel Bonding Driver: v3.2.5 (March 21, 2008)
    bonding: MII link monitoring set to 50 ms
    bonding: bond0 is being deleted...
    e1000: eth0: e1000_watchdog_task: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
    program scsiinfo is using a deprecated SCSI ioctl, please convert it to SG_IO
    program scsiinfo is using a deprecated SCSI ioctl, please convert it to SG_IO
    program scsiinfo is using a deprecated SCSI ioctl, please convert it to SG_IO
    program scsiinfo is using a deprecated SCSI ioctl, please convert it to SG_IO
    kjournald starting. Commit interval 5 seconds
    EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
    EXT3 FS on dm-10, internal journal
    EXT3-fs: recovery complete.
    EXT3-fs: mounted filesystem with ordered data mode.
    drbd: initialised. Version: 8.0.8 (api:86/proto:86)
    drbd: GIT-hash: bd3e2c922f95c4fa0dca57a4f8c24bf8b249cc02 build by root@compiler, 2008-07-31 14:13:57
    drbd: registered as block device major 147
    drbd: minor_table @ 0xf5f85c00
    kjournald starting. Commit interval 5 seconds
    EXT3 FS on ram15, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    program scsiinfo is using a deprecated SCSI ioctl, please convert it to SG_IO
    program scsiinfo is using a deprecated SCSI ioctl, please convert it to SG_IO
    kjournald starting. Commit interval 5 seconds
    EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
    EXT3 FS on dm-6, internal journal
    EXT3-fs: recovery complete.
    EXT3-fs: mounted filesystem with ordered data mode.
    Filesystem "dm-9": Disabling barriers, not supported by the underlying device
    XFS mounting filesystem dm-9
    Starting XFS recovery on filesystem: dm-9 (logdev: internal)
    Ending XFS recovery on filesystem: dm-9 (logdev: internal)
    kjournald starting. Commit interval 5 seconds
    EXT3 FS on dm-2, internal journal
    EXT3-fs: recovery complete.
    EXT3-fs: mounted filesystem with ordered data mode.
    Filesystem "dm-5": Disabling barriers, not supported by the underlying device
    XFS mounting filesystem dm-5
    Ending clean XFS mount for filesystem: dm-5
    Adding 4194296k swap on /dev/vg+MediaLibrary/nas_swap. Priority:-1 extents:1 across:4194296k
    Adding 4194296k swap on /dev/vg+MediaLibrary2/nas_swap. Priority:-2 extents:1 across:4194296k
    scst: Waiting for 0 active commands to complete... This might take few minutes for disks or few hours for tapes, if you use long executed commands, like REWIND or FORMAT. In case, if you have a hung user space device (i.e. made using scst_user module) not responding to any commands, if might take virtually forever until the corresponding user space program recovers and starts responding or gets killed.
    scst: All active commands completed
    scst: Attached SCSI target mid-level at scsi0, channel 0, id 0, lun 0, type 0
    scst: Waiting for 0 active commands to complete... This might take few minutes for disks or few hours for tapes, if you use long executed commands, like REWIND or FORMAT. In case, if you have a hung user space device (i.e. made using scst_user module) not responding to any commands, if might take virtually forever until the corresponding user space program recovers and starts responding or gets killed.
    scst: All active commands completed
    scst: Attached SCSI target mid-level at scsi1, channel 0, id 0, lun 0, type 0
    scst: Waiting for 0 active commands to complete... This might take few minutes for disks or few hours for tapes, if you use long executed commands, like REWIND or FORMAT. In case, if you have a hung user space device (i.e. made using scst_user module) not responding to any commands, if might take virtually forever until the corresponding user space program recovers and starts responding or gets killed.
    scst: All active commands completed
    scst: Attached SCSI target mid-level at scsi1, channel 0, id 1, lun 0, type 0
    scst: Processing thread started, PID 10316
    scst: Processing thread started, PID 10320
    scst: Init thread started, PID 10322
    scst: Task management thread started, PID 10323
    scst: Management thread started, PID 10324
    scst: SCST version 1.0.0-rc1 loaded successfully (max mem for commands 505MB, per device 202MB)
    scst: Enabled features: TRACING
    scst: Virtual device handler vdisk for type 0 registered successfully
    scst: Virtual device handler vdisk_blk for type 0 registered successfully
    scst: Virtual device handler vcdrom for type 5 registered successfully
    iSCSI Enterprise Target Software - version 0.4.15
    iotype_init(92) register fileio
    iotype_init(92) register blockio
    iotype_init(92) register nullio
    3w-9xxx: scsi1: AEN: INFO (0x04:0x000B): Rebuild started:unit=0.
    3w-9xxx: scsi1: AEN: WARNING (0x04:0x004B): Battery temperature is high:.
    3w-9xxx: scsi1: AEN: ERROR (0x04:0x004D): Battery temperature is too high:.
    3w-9xxx: scsi1: AEN: INFO (0x04:0x0055): Battery charging started:.
    3dm2[12028] general protection ip:b7e71bf2 sp:bfb430a0 error:0 in libc-2.3.2.so[b7e00000+12a000]
    3w-9xxx: scsi1: AEN: INFO (0x04:0x000B): Rebuild started:unit=0.
    3w-9xxx: scsi1: AEN: INFO (0x04:0x000B): Rebuild started:unit=0.
    3w-9xxx: scsi1: AEN: INFO (0x04:0x0056): Battery charging completed:.
    3w-9xxx: scsi1: AEN: ERROR (0x04:0x0057): Battery charging fault:.
    3w-9xxx: scsi1: AEN: ERROR (0x04:0x0009): Drive timeout detectedort=7.
    3w-9xxx: scsi1: AEN: ERROR (0x04:0x0002): Degraded unit:unit=0, port=7.
    3w-9xxx: scsi1: AEN: ERROR (0x04:0x0009): Drive timeout detectedort=7.
    3w-9xxx: scsi1: AEN: ERROR (0x04:0x0009): Drive timeout detectedort=8.
    3w-9xxx: scsi1: AEN: ERROR (0x04:0x000A): Drive error detected:unit=0, port=8.
    3w-9xxx: scsi1: AEN: ERROR (0x04:0x0009): Drive timeout detectedort=8.
    sd 1:0:0:0: WARNING: (0x06:0x002C): Command (0x88) timed out, resetting card.
    3w-9xxx: scsi1: ERROR: (0x06:0x001F): Microcontroller not ready during reset sequence.
    3w-9xxx: scsi1: ERROR: (0x06:0x001F): Microcontroller not ready during reset sequence.
    3w-9xxx: scsi1: ERROR: (0x06:0x002B): Controller reset failed during scsi host reset.
    sd 1:0:0:0: Device offlined - not ready after error recovery
    sd 1:0:0:0: Device offlined - not ready after error recovery
    sd 1:0:0:0: Device offlined - not ready after error recovery
    sd 1:0:0:0: rejecting I/O to offline device
    sd 1:0:0:0: rejecting I/O to offline device
    sd 1:0:0:0: rejecting I/O to offline device
    sd 1:0:0:0: rejecting I/O to offline device
    Buffer I/O error on device dm-10, logical block 163848
    lost page write due to I/O error on dm-10
    sd 1:0:0:0: [sdb] Result: hostbyte=0x01 driverbyte=0x00
    end_request: I/O error, dev sdb, sector 88440
    sd 1:0:0:0: rejecting I/O to offline device
    Buffer I/O error on device dm-10, logical block 2817
    lost page write due to I/O error on dm-10
    Aborting journal on device dm-10.
    sd 1:0:0:0: rejecting I/O to offline device
    Buffer I/O error on device dm-10, logical block 521
    lost page write due to I/O error on dm-10
    EXT3-fs error (device dm-10) in ext3_reserve_inode_write: Journal has aborted
    EXT3-fs error (device dm-10) in ext3_reserve_inode_write: Journal has aborted
    sd 1:0:0:0: rejecting I/O to offline device
    Buffer I/O error on device dm-10, logical block 0
    lost page write due to I/O error on dm-10
    EXT3-fs error (device dm-10) in ext3_dirty_inode: Journal has aborted
    ------------[ cut here ]------------

  7. #7

    Default

    WARNING: at fs/buffer.c:1183 mark_buffer_dirty+0x96/0xa0()
    Modules linked in: iscsi_trgt scst_vdisk scst drbd bonding iscsi_tcp libiscsi scsi_transport_iscsi 3w_9xxx e1000 button ftdi_sio usbserial
    Pid: 30727, comm: smbd Not tainted 2.6.25.13-oe32-00000-g0c9122d #23
    [<c012234e>] warn_on_slowpath+0x3e/0x60
    [<c0433517>] dm_unplug_all+0x17/0x30
    [<c01190c9>] task_rq_lock+0x29/0x50
    [<c011bf77>] try_to_wake_up+0xc7/0xf0
    [<c011dca6>] __wake_up_common+0x36/0x60
    [<c011dcf7>] __wake_up+0x27/0x40
    [<c012303c>] wake_up_klogd+0x2c/0x30
    [<c0192277>] __wait_on_buffer+0x17/0x20
    [<c0195a74>] sync_dirty_buffer+0x54/0xc0
    [<c01932e6>] mark_buffer_dirty+0x96/0xa0
    [<c01c2bca>] ext3_commit_super+0x3a/0x50
    [<c01c012f>] ext3_handle_error+0x3f/0xa0
    [<c01c0293>] __ext3_std_error+0x33/0x60
    [<c01c007e>] __ext3_journal_stop+0x2e/0x40
    [<c018e6c7>] __mark_inode_dirty+0xc7/0x150
    [<c01867ec>] touch_atime+0x8c/0xe0
    [<c0153093>] generic_file_mmap+0x43/0x50
    [<c01643f0>] mmap_region+0x170/0x420
    [<c0153050>] generic_file_mmap+0x0/0x50
    [<c0164063>] do_mmap_pgoff+0x1d3/0x370
    [<c0106e8c>] sys_mmap2+0x5c/0x80
    [<c0103a42>] syscall_call+0x7/0xb
    =======================
    ---[ end trace 0c9a357e48a06970 ]---
    sd 1:0:0:0: rejecting I/O to offline device
    Buffer I/O error on device dm-10, logical block 0
    lost page write due to I/O error on dm-10
    ext3_abort called.
    EXT3-fs error (device dm-10): ext3_journal_start_sb: Detected aborted journal
    Remounting filesystem read-only
    EXT3-fs error (device dm-10) in ext3_reserve_inode_write: Journal has aborted
    EXT3-fs error (device dm-10) in ext3_reserve_inode_write: Journal has aborted
    sd 1:0:0:0: rejecting I/O to offline device
    Buffer I/O error on device dm-10, logical block 0
    lost page write due to I/O error on dm-10
    sd 1:0:0:0: rejecting I/O to offline device
    sd 1:0:0:0: rejecting I/O to offline device
    Buffer I/O error on device dm-10, logical block 163845
    lost page write due to I/O error on dm-10
    sd 1:0:0:0: rejecting I/O to offline device
    Buffer I/O error on device dm-10, logical block 163848
    lost page write due to I/O error on dm-10
    3w-9xxx: scsi1: WARNING: (0x06:0x0037): Character ioctl (0x108) timed out, resetting card.
    3w-9xxx: scsi1: AEN: WARNING (0x04:0x0039): Buffer ECC error corrected:address=0x17C820.
    3w-9xxx: scsi1: AEN: WARNING (0x04:0x0039): Buffer ECC error corrected:address=0x17C820.
    3w-9xxx: scsi1: AEN: WARNING (0x04:0x0039): Buffer ECC error corrected:address=0x17C820.
    3w-9xxx: scsi1: AEN: ERROR (0x04:0x005F): Cache synchronization failed; some data lost:unit=0.
    3w-9xxx: scsi1: AEN: ERROR (0x04:0x005F): Cache synchronization failed; some data lost:unit=1.
    3w-9xxx: scsi1: AEN: INFO (0x04:0x000B): Rebuild started:unit=0.
    3w-9xxx: scsi1: AEN: INFO (0x04:0x0005): Rebuild completed:unit=0.
    3w-9xxx: scsi1: AEN: WARNING (0x04:0x002F): Verify not started; unit never initialized:Raid5/6 subunit=0.
    3w-9xxx: scsi1: AEN: INFO (0x04:0x0029): Verify started:unit=0.
    3w-9xxx: scsi1: AEN: WARNING (0x04:0x0023): Sector repair completedort=3, LBA=0x15E0C8.
    3w-9xxx: scsi1: AEN: INFO (0x04:0x0029): Verify started:unit=0.
    3w-9xxx: scsi1: AEN: INFO (0x04:0x000B): Rebuild started:unit=0.
    st: Version 20080221, fixed bufsize 32768, s/g segs 256
    Driver 'st' needs updating - please use bus_type methods
    sd 0:0:0:0: Attached scsi generic sg0 type 0
    sd 1:0:0:0: Attached scsi generic sg1 type 0
    sd 1:0:1:0: Attached scsi generic sg2 type 0
    sd 1:0:0:0: rejecting I/O to offline device
    xfs_force_shutdown(dm-9,0x1) called from line 420 of file fs/xfs/xfs_rw.c. Return address = 0xc02a2650
    Filesystem "dm-9": I/O Error Detected. Shutting down filesystem: dm-9
    Please umount the filesystem, and rectify the problem(s)
    sd 1:0:0:0: rejecting I/O to offline device
    sd 1:0:0:0: rejecting I/O to offline device
    sd 1:0:0:0: rejecting I/O to offline device
    sd 1:0:0:0: rejecting I/O to offline device
    sd 1:0:0:0: rejecting I/O to offline device
    sd 1:0:0:0: rejecting I/O to offline device
    sd 1:0:0:0: rejecting I/O to offline device
    Buffer I/O error on device dm-10, logical block 167938
    EXT3-fs error (device dm-10): ext3_readdir: directory #81946 contains a hole at offset 0
    sd 1:0:0:0: rejecting I/O to offline device
    Buffer I/O error on device dm-10, logical block 167939
    EXT3-fs error (device dm-10): ext3_readdir: directory #81947 contains a hole at offset 0
    sd 1:0:0:0: rejecting I/O to offline device
    EXT3-fs error (device dm-10): ext3_get_inode_loc: unable to read inode block - inode=81984, block=163845
    sd 1:0:0:0: rejecting I/O to offline device
    sd 1:0:0:0: rejecting I/O to offline device
    sd 1:0:0:0: rejecting I/O to offline device
    sd 1:0:0:0: rejecting I/O to offline device
    sd 1:0:0:0: rejecting I/O to offline device
    sd 1:0:0:0: rejecting I/O to offline device
    sd 1:0:0:0: rejecting I/O to offline device
    sd 1:0:0:0: rejecting I/O to offline device
    sd 1:0:0:0: rejecting I/O to offline device
    sd 1:0:0:0: rejecting I/O to offline device
    sd 1:0:0:0: rejecting I/O to offline device
    sd 1:0:0:0: rejecting I/O to offline device
    sd 1:0:0:0: rejecting I/O to offline device
    sd 1:0:0:0: rejecting I/O to offline device
    sd 1:0:0:0: rejecting I/O to offline device
    sd 1:0:0:0: rejecting I/O to offline device
    sd 1:0:0:0: rejecting I/O to offline device
    sd 1:0:0:0: rejecting I/O to offline device
    sd 1:0:0:0: rejecting I/O to offline device
    Buffer I/O error on device dm-10, logical block 182301
    EXT3-fs error (device dm-10): ext3_readdir: directory #82013 contains a hole at offset 0
    sd 1:0:0:0: rejecting I/O to offline device
    Buffer I/O error on device dm-10, logical block 176154
    EXT3-fs error (device dm-10): ext3_readdir: directory #82045 contains a hole at offset 0
    sd 1:0:0:0: rejecting I/O to offline device
    Buffer I/O error on device dm-10, logical block 176155
    EXT3-fs error (device dm-10): ext3_readdir: directory #82046 contains a hole at offset 0
    sd 1:0:0:0: rejecting I/O to offline device
    EXT3-fs error (device dm-10): ext3_get_inode_loc: unable to read inode block - inode=82064, block=163848
    sd 1:0:0:0: rejecting I/O to offline device
    sd 1:0:0:0: rejecting I/O to offline device
    sd 1:0:0:0: rejecting I/O to offline device
    sd 1:0:0:0: rejecting I/O to offline device
    sd 1:0:0:0: rejecting I/O to offline device
    sd 1:0:0:0: rejecting I/O to offline device
    3w-9xxx: scsi1: AEN: WARNING (0x04:0x0023): Sector repair completedort=3, LBA=0x8AD396.
    3w-9xxx: scsi1: AEN: INFO (0x04:0x000B): Rebuild started:unit=0.
    3w-9xxx: scsi1: AEN: INFO (0x04:0x0055): Battery charging started:.
    3w-9xxx: scsi1: AEN: INFO (0x04:0x0056): Battery charging completed:.
    3w-9xxx: scsi1: AEN: INFO (0x04:0x0055): Battery charging started:.
    3w-9xxx: scsi1: AEN: INFO (0x04:0x0056): Battery charging completed:.
    3w-9xxx: scsi1: AEN: WARNING (0x04:0x004B): Battery temperature is high:.
    3w-9xxx: scsi1: AEN: INFO (0x04:0x0005): Rebuild completed:unit=0.
    3dm2[15921] general protection ip:b7fe5bf2 sp:bfeb67e0 error:0 in libc-2.3.2.so[b7f74000+12a000]
    xfs_force_shutdown(dm-9,0x1) called from line 420 of file fs/xfs/xfs_rw.c. Return address = 0xc02a2650
    3w-9xxx: scsi1: AEN: ERROR (0x04:0x004D): Battery temperature is too high:.
    3w-9xxx: scsi1: AEN: WARNING (0x04:0x004B): Battery temperature is high:.
    3w-9xxx: scsi1: AEN: INFO (0x04:0x0029): Verify started:unit=0.
    3w-9xxx: scsi1: AEN: WARNING (0x04:0x0023): Sector repair completedort=3, LBA=0x8A90F3.
    3w-9xxx: scsi1: AEN: ERROR (0x04:0x004D): Battery temperature is too high:.
    3w-9xxx: scsi1: AEN: WARNING (0x04:0x004B): Battery temperature is high:.
    3w-9xxx: scsi1: AEN: INFO (0x04:0x002B): Verify completed:unit=0.
    xfs_force_shutdown(dm-9,0x1) called from line 420 of file fs/xfs/xfs_rw.c. Return address = 0xc02a2650
    sd 1:0:0:0: rejecting I/O to offline device
    sd 1:0:0:0: rejecting I/O to offline device
    sd 1:0:0:0: rejecting I/O to offline device
    program scsiinfo is using a deprecated SCSI ioctl, please convert it to SG_IO
    program scsiinfo is using a deprecated SCSI ioctl, please convert it to SG_IO
    program scsiinfo is using a deprecated SCSI ioctl, please convert it to SG_IO
    sd 1:0:0:0: rejecting I/O to offline device
    sd 1:0:0:0: rejecting I/O to offline device
    sd 1:0:0:0: rejecting I/O to offline device
    program scsiinfo is using a deprecated SCSI ioctl, please convert it to SG_IO
    sd 1:0:0:0: rejecting I/O to offline device
    sd 1:0:0:0: rejecting I/O to offline device
    sd 1:0:0:0: rejecting I/O to offline device
    program scsiinfo is using a deprecated SCSI ioctl, please convert it to SG_IO
    xfs_force_shutdown(dm-9,0x1) called from line 420 of file fs/xfs/xfs_rw.c. Return address = 0xc02a2650
    sd 1:0:0:0: rejecting I/O to offline device
    sd 1:0:0:0: rejecting I/O to offline device
    sd 1:0:0:0: rejecting I/O to offline device
    program scsiinfo is using a deprecated SCSI ioctl, please convert it to SG_IO

  8. #8

    Default

    There is for sure something wrong w/ the 3Ware, Buffer IO errors, ECC errors (related to memory).... If you can really say that the RAID is ok then you can try running the Repair Filesystem from the Extended tools section (but you will need Console access). I would really get 3Ware involved to have a look at those outputs.
    All the best,

    Todd Maxwell


    Follow the red "E"
    Facebook | Twitter | YouTube

  9. #9

    Default

    The customer was hardbooting the NAS server which caused those errors. The RAID rebuilt fine, but after the rebuild, NAS-R3 started having the problems described.

  10. #10

    Default

    Then if all is ok w/ RAID array then I would run the Repair Filesystem from the Extended tools section.
    All the best,

    Todd Maxwell


    Follow the red "E"
    Facebook | Twitter | YouTube

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •