Visit Open-E website
Results 1 to 2 of 2

Thread: S/W RAID clean, degraded

Thread has average rating 5.00 / 5.00 based on 4 votes.
Thread has been visited 4677 times.
  1. #1

    Default S/W RAID clean, degraded

    Hi there,
    I'm facing this problem now on an 8x2 TB RAID 5 array. The system seems to work fine and the data is still there, apparently. Despite that, when selecting RAID => S/W RAID => Unit MD0 from the web GUI, in the "Function: Info" frame, it reads "state: clean, degraded". Also, when going back to the "S/W RAID units" menu, unit S6 says "available", while the other 7 units are "in use, Unit MD0". How do I revert it back to the normal operating status?
    I have also read this:
    http://kb.open-e.com/S/W-RAID-is-deg...RAID_1373.html
    but it refers to another version of Open-E, and I'm not willing to try without knowing what I'm doing, and thus possibly destroy the data.

    Please help me out before it fails completely.

  2. #2
    Join Date
    Oct 2010
    Location
    GA
    Posts
    935

    Default

    The data needs to be backed up, and the drive re-added to the array and rebuilt, as stated in the KB article.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •