Visit Open-E website
Results 1 to 4 of 4

Thread: Hope to disable OpenSM Subnet Manager?

  1. #1

    Default Hope to disable OpenSM Subnet Manager?

    How do I stop the built in Infiniband Subnet Manager from loading at startup?

    I have setup a new DSS7 box and every time I boot the box my Infiniband network starts throwing errors. All my existing Windows Servers start dropping connections to the Infiniband fabric.

    I am thinking it is the built in subnet manager so I want to disable it to see if the problem is resolved if SM is not loaded.

    Thanks,

    Todd

  2. #2

    Default

    Go into the Console screen and enter CTRL ALT W then select the Infiniband tuning to turn off settings. Your will have test some of the settings. If you can submit the logs to support to see if the card is ok or we can see if there is other issues.
    All the best,

    Todd Maxwell


    Follow the red "E"
    Facebook | Twitter | YouTube

  3. #3

    Default

    Hi Todd,

    That was the 1st place I checked. Unless I am missing something there is only one option there and that is to choose between Datagram or Connected Mode.

    I also looked in Tuning Options > Options for Mellanox but no luck.

    Todd

  4. #4

    Default

    Check your inbox - I want to get the logs.
    All the best,

    Todd Maxwell


    Follow the red "E"
    Facebook | Twitter | YouTube

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •