Visit Open-E website
Results 1 to 4 of 4

Thread: HDA Errors..

  1. #1

    Default HDA Errors..

    I'm seeing some errors on my unit and I'm trying to determine what is going on..

    Aug 12 13:15:11 iSCSI-T kernel: end_request: I/O error, dev hda, sector 485566
    Aug 12 13:15:11 iSCSI-T kernel: ide: failed opcode was: unknown
    Aug 12 13:15:11 iSCSI-T kernel: hda: task_in_intr: error=0x44 { DriveStatusError UncorrectableError }, LBAsect=485566, sector=485566
    Aug 12 13:15:11 iSCSI-T kernel: hda: task_in_intr: status=0x51 { DriveReady SeekComplete Error }
    Aug 12 13:15:11 iSCSI-T kernel: end_request: I/O error, dev hda, sector 485564
    Aug 12 13:15:11 iSCSI-T kernel: ide: failed opcode was: unknown
    Aug 12 13:15:11 iSCSI-T kernel: hda: task_in_intr: error=0x44 { DriveStatusError UncorrectableError }, LBAsect=485564, sector=485564
    Aug 12 13:15:11 iSCSI-T kernel: hda: task_in_intr: status=0x51 { DriveReady SeekComplete Error }
    Aug 12 13:14:54 iSCSI-T kernel: end_request: I/O error, dev hda, sector 500892
    Aug 12 13:14:54 iSCSI-T kernel: ide: failed opcode was: unknown
    Aug 12 13:14:54 iSCSI-T kernel: hda: task_in_intr: error=0x44 { DriveStatusError UncorrectableError }, LBAsect=500892, sector=500892
    Aug 12 13:14:54 iSCSI-T kernel: hda: task_in_intr: status=0x51 { DriveReady SeekComplete Error }
    Aug 12 13:14:54 iSCSI-T kernel: end_request: I/O error, dev hda, sector 485566
    Aug 12 13:14:54 iSCSI-T kernel: ide: failed opcode was: unknown
    Aug 12 13:14:54 iSCSI-T kernel: hda: task_in_intr: error=0x44 { DriveStatusError UncorrectableError }, LBAsect=485566, sector=485566
    Aug 12 13:14:54 iSCSI-T kernel: hda: task_in_intr: status=0x51 { DriveReady SeekComplete Error }
    Aug 12 13:14:54 iSCSI-T kernel: end_request: I/O error, dev hda, sector 485564
    Aug 12 13:14:54 iSCSI-T kernel: ide: failed opcode was: unknown
    Aug 12 13:14:54 iSCSI-T kernel: hda: task_in_intr: error=0x44 { DriveStatusError UncorrectableError }, LBAsect=485564, sector=485564
    Aug 12 13:14:54 iSCSI-T kernel: hda: task_in_intr: status=0x51 { DriveReady SeekComplete Error }
    Aug 12 13:14:54 iSCSI-T kernel: end_request: I/O error, dev hda, sector 485566
    Aug 12 13:14:54 iSCSI-T kernel: ide: failed opcode was: unknown
    Aug 12 13:14:54 iSCSI-T kernel: hda: task_in_intr: error=0x44 { DriveStatusError UncorrectableError }, LBAsect=485566, sector=485566
    Aug 12 13:14:54 iSCSI-T kernel: hda: task_in_intr: status=0x51 { DriveReady SeekComplete Error }
    Aug 12 13:14:54 iSCSI-T kernel: end_request: I/O error, dev hda, sector 485564
    Aug 12 13:14:54 iSCSI-T kernel: ide: failed opcode was: unknown
    Aug 12 13:14:54 iSCSI-T kernel: hda: task_in_intr: error=0x44 { DriveStatusError UncorrectableError }, LBAsect=485564, sector=485564
    Aug 12 13:14:54 iSCSI-T kernel: hda: task_in_intr: status=0x51 { DriveReady SeekComplete Error }

    Does this mean that my DOM is going bad?

  2. #2

    Default

    It could be. Try re-flashing the DOM with CD. Save settings before you do this. Also try reseating the DOM back in the IDE port. If this does not help inform support that you will need an RMA to replace the DOM.
    All the best,

    Todd Maxwell


    Follow the red "E"
    Facebook | Twitter | YouTube

  3. #3

    Default

    When you say support, do you mean open-e support?

  4. #4

    Default

    Yes. Also I see the email and I will respond. But could you tell me what was the results from the re-flashing....?
    All the best,

    Todd Maxwell


    Follow the red "E"
    Facebook | Twitter | YouTube

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •