Printable View
Good day.
We are have problem
Server in NAS mode.
Client connect to server without switch, We are use gigabit crossover
when we copy file from client to sever lan speed - 60 megabytes per sec
if copy file from Server to client - lan speed - 6 mb/s - it's bad
What RAID controller and RAID level are you using,
did you turn on cache and enable write back on the controller.
What version software are you using?
With Gigabit Ethernet you do not need a crossover cable, can you try a straight cable. (cat 6)
open-e v 5.45
raid level 5
wb on
I use cat 6
if I mount network folder as drive - I get 6 mb/s upload/download
IF I go to server via explorer (\\IP) - I get 60 mb/s upload/download
IF I go to server via explorer (\\name) - I get 6 mb/s upload/download
it's very stange
It sounds like you have a DNS/Network problem with the remote PC, since the DSS server would know nothing of your use of Hostname vs. IP address -- all the traffic to DSS is delivered using IP address references only.