FC Problem in Target Mode
Hello,
I have the following problem:
I have DSS Rel. 5.0.DB48000000.3251.
My FC-Card is a QLogic QLE-2460.
In Initiator Mode everything is working fine. I can use the console Qlogic-Tools an the remote Sansurfer Tools.
I can see the following drivers loadad on the DSS:
Netzwerkkarten
Intel Corporation PRO/1000 MT Dual Port Server Adapter
Intel Corporation PRO/1000 MT Dual Port Server Adapter
RAID/SCSI Kontroller
Adaptec AIC-7902B U320 (rev 10)
Adaptec AIC-7902B U320 (rev 10)
3ware Inc 9550SX SATA-RAID
Fibre Channel Kontroller
QLogic Corp. ISP2432-based 4Gb Fibre Channel to PCI Express HBA (rev 02)
Treiber-Typ
Netzwerk Treiber:
Ethernet Channel Bonding Driver, v3.2.5
Intel(R) PRO/1000 Network Driver
RAID/SCSI Treiber:
SCSI disk (type 0) and CDROM (type 5) dev handler for SCST using files on file systems or block devices
SCSI target core
iSCSI/TCP data-path
iSCSI library functions
SCSI tape (st) driver
iSCSI Transport Interface
QLogic ISP24xx FC-SCSI Host Bus Adapter driver
QLogic Fibre Channel HBA Driver (Target Support)
FC Transport Attributes
Adaptec AIC790X U320 SCSI Host Bus Adapter driver
SPI Transport Attributes
3ware 9000 Storage Controller Linux Driver
If I switch to Target Mode the drivers seem to stop loading:
Kontroller-Typ
Netzwerkkarten
Intel Corporation PRO/1000 MT Dual Port Server Adapter
Intel Corporation PRO/1000 MT Dual Port Server Adapter
RAID/SCSI Kontroller
Adaptec AIC-7902B U320 (rev 10)
Adaptec AIC-7902B U320 (rev 10)
3ware Inc 9550SX SATA-RAID
Fibre Channel Kontroller
QLogic Corp. ISP2432-based 4Gb Fibre Channel to PCI Express HBA (rev 02)
Treiber-Typ
Netzwerk Treiber:
Ethernet Channel Bonding Driver, v3.2.5
Intel(R) PRO/1000 Network Driver
RAID/SCSI Treiber:
SCSI disk (type 0) and CDROM (type 5) dev handler for SCST using files on file systems or block devices
iSCSI/TCP data-path
iSCSI library functions
iSCSI Transport Interface
SCSI target core
Adaptec AIC790X U320 SCSI Host Bus Adapter driver
SPI Transport Attributes
3ware 9000 Storage Controller Linux Driver
The QLogic Console Tools aren't there any mor (No Tool) and Sansurfer can't connect to the DSS Host.
Is the QLE2460 only working in Initiator Mode ? I read some Forum Threads with DSS and 2460 in Target Mode working ...
Thanks in advice for any help ..
