VMWare and DSS iSCSI MPIO

Hi,

We were trying to setup VMware to connect to DSS via iSCSI and use multipath (MPIO).
To do this I had two bond interfaces created on DSS which were used for iSCSI in different subnets and then have two virtual switches on VMWare each having VMKernel and Service Console in those two subnets.
After that I set VMWare iSCSI initiator to have two discovery addresses (one in each subnet).

But VMWare still shows just one path to the target....

Is MPIO/multipath supported with VMWare?

Thanks.