Qle4062c-ck

Printable View

07-13-2009, 01:45 PM
davidthornton

Qle4062c-ck

Is the Qlogic 1GB DUAL PORT iSCSI PCIe RJ45 COPPER (QLE4062C-CK) compatible with Open-E DSS 5.0 and above?

Thanks.
07-14-2009, 05:17 AM
To-M

Only the list from the link below do we have support for initiator mode only.

http://www.open-e.com/service-and-su...ator/hardware/
07-14-2009, 03:28 PM
davidthornton

I've installed one in my DSS running version 5.0.DB49000000.3278. It's listed under hardware but nowhere else that I can see in the DSS GUI. Is there any way of making it work or do I have to buy an older model on ebay that doesn't support PCI-E? :)

Thanks :D

Network controllers
ASUSTeK Computer Inc. Marvell 88E8001 Gigabit Ethernet Controller (Asus)
ASUSTeK Computer Inc. Marvell 88E8052 Gigabit Ethernet Controller (Asus)
QLogic Corp. ISP4032-based Ethernet IPv6 NIC
QLogic Corp. ISP4032-based Ethernet IPv6 NIC

RAID/SCSI controllers
Areca Technology Corp. ARC-1231 12-Port PCI-Express to SATA RAID Controller
QLogic Corp. ISP4032-based iSCSI TOE IPv6 HBA
QLogic Corp. ISP4032-based iSCSI TOE IPv6 HBA

Network drivers:
Ethernet Channel Bonding Driver, v3.2.5
Marvell Yukon 2 Gigabit Ethernet driver
SysKonnect Gigabit Ethernet driver

RAID/SCSI drivers:
SCSI generic (sg) driver
SCSI disk (type 0) and CDROM (type 5) dev handler for SCST using files on file systems or block devices
SCSI target core
iSCSI/TCP data-path
iSCSI library functions
iSCSI Transport Interface
ARECA (ARC11xx/12xx/13xx/16xx) SATA/SAS RAID HOST Adapter
07-14-2009, 04:02 PM
To-M

We dont have this card for testing but I think it will be used as a NIC only, check in the Setup > Network interfaces to see if it is there as a NIC. If not then you will most likely be better off using the older ones or go with a 1GbE NIC.
07-14-2009, 04:26 PM
davidthornton

Quote:

Originally Posted by To-M

We dont have this card for testing but I think it will be used as a NIC only, check in the Setup > Network interfaces to see if it is there as a NIC. If not then you will most likely be better off using the older ones or go with a 1GbE NIC.

How about I sent it to you and you can test it/support it, then send it back? :)
07-14-2009, 06:33 PM
To-M

Possibly but keep in mind they will only support it as an initiator not as a target. It will take some time for engineers to get to it. Send an email to support@open-e.com asking if you can send this in and verify if this can be used and if it is possible first before sending it in.