Printable View
Hi,
When I am enabling AFP talk on DSS its got hanged and not responding after that I have to remove network cables and boot the system and uncheck the apple talk and restart with network cable.
Could you please tell me the reason as well as solution for the same.
I have DSS 5.0up62.7101.3518 with storage capacity 16TB.
Try to run the file system repair utility from the Extended Tools section from Console, this will restart the system then try to remove the Apple temp files in the Extended Tools as well. If there are no errors from the Repair filesystem then check RAID health. Also remove the AFP from the share and from the NAS Settings, not sure if you just did the Settings or from the Share as that was not noted but try this after performing the steps mentioned from the Extended Tools (enter from the console screen CTRL + ALT + X to access the Extended tools ).
Thanks,
I have performed the steps which mentioned by you.
1. AFP from NAS setting already removed b'cos its not working.
2. Run the file system check - done without error
3. Remove Apple temp files - done without error
4. Raid health - OK (3Ware)
After performing all the above steps I have Start AFP from NAS setting but face the same problem “system got hanged”. If you need I can send you the system logs.
Please advice.
Regards,
Yes please send the logs from the GUI in Status > Hardware > Logs.
Hi Todd,
Please check the link for logs.
http://www.yousendit.com/download/VG...bWdrWTlMWEE9PQ
Regards,
08:00.0 "Ethernet controller" "Intel Corporation" "80003ES2LAN Gigabit Ethernet Controller (Copper)" -r01 "Intel Corporation" "Unknown device 3484"
08:00.1 "Ethernet controller" "Intel Corporation" "80003ES2LAN Gigabit Ethernet Controller (Copper)" -r01 "Intel Corporation" "Unknown device 3484"
[Tue Jan 05 19:33:21 2010] [error] [client 192.168.5.25] PHP Warning: require_once(session.php) [<a href='function.require-once'>function.require-once</a>]: failed to open stream: No such file or directory in /mnt/hda3/www/css/IE/menuIEFix.css.php on line 2, referer: https://dss/index.php?module=menu
[Tue Jan 05 19:33:21 2010] [error] [client 192.168.5.25] PHP Fatal error: require_once() [<a href='function.require'>function.require</a>]: Failed opening required 'session.php' (include_path='.:/usr/share/php') in /mnt/hda3/www/css/IE/menuIEFix.css.php on line 2, referer: https://dss/index.php?module=menu
Hey amitmittal
I looked at your logs, please see my previous post with errors in you logs.
I think the Intel Corporation" "80003ES2LAN is supported.
Can you try to remove bond and test.
also what is at 192.168.5.25
can also check to see if the nic has the latest firmware.
This looks like a problem with the disk array but can be related to memory.
can you run a memory test ?
sd 3:0:0:0: [sda] Very big device. Trying to use READ CAPACITY(16).
sd 3:0:0:0: [sda] 27343454208 512-byte hardware sectors (13999849 MB)
sd 3:0:0:0: [sda] Write Protect is off
sd 3:0:0:0: [sda] Mode Sense: 23 00 00 00
sd 3:0:0:0: [sda] Write cache: enabled, read cache: disabled, doesn't support DPO or FUA
sd 3:0:0:0: [sda] Very big device. Trying to use READ CAPACITY(16).
sd 3:0:0:0: [sda] 27343454208 512-byte hardware sectors (13999849 MB)
sd 3:0:0:0: [sda] Write Protect is off
sd 3:0:0:0: [sda] Mode Sense: 23 00 00 00
sd 3:0:0:0: [sda] Write cache: enabled, read cache: disabled, doesn't support DPO or FUA
sda: unknown partition table
sd 3:0:0:0: [sda] Attached SCSI disk
attempt to access beyond end of device
sda: rw=0, want=18446744066693267456, limit=27343454208
attempt to access beyond end of device
sda: rw=0, want=18446744066693266432, limit=27343454208
attempt to access beyond end of device
sda: rw=0, want=18446744066693267452, limit=27343454208
attempt to access beyond end of device
sda: rw=0, want=18446744066693266428, limit=27343454208
attempt to access beyond end of device
sda: rw=0, want=18446744066693267460, limit=27343454208
attempt to access beyond end of device
0000:05:00.0: : Failed to initialize MSI interrupts. Falling back to legacy interrupts.
0000:05:00.0: eth0: (PCI Express:2.5GB/s:Width x4) 00:15:17:29:01:10
0000:05:00.0: eth0: Intel(R) PRO/1000 Network Connection
0000:05:00.0: eth0: MAC: 1, PHY: 4, PBA No: d47316-004
e1000e 0000:05:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
e1000e 0000:05:00.1: setting latency timer to 64
0000:05:00.1: : Failed to initialize MSI interrupts. Falling back to legacy interrupts.
0000:05:00.1: eth1: (PCI Express:2.5GB/s:Width x4) 00:15:17:29:01:11
0000:05:00.1: eth1: Intel(R) PRO/1000 Network Connection
0000:05:00.1: eth1: MAC: 1, PHY: 4, PBA No: d47316-004
e1000e 0000:06:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
e1000e 0000:06:00.0: setting latency timer to 64
Problem resolved after reconnect External LDAP (Windows ADS).
Thanks for your support.