i would like to setup the following:
raid controller A: raid1 -> /dev/sda
raid controller B: raid1 -> /dev/sdb
use open-e to form a raid1 over sda and sdb.
do you think this will be feasible?
Printable View
i would like to setup the following:
raid controller A: raid1 -> /dev/sda
raid controller B: raid1 -> /dev/sdb
use open-e to form a raid1 over sda and sdb.
do you think this will be feasible?
Yes this is possible, after creating the arrays then use the SW RAID function in the GUI.