How to use fxp?

Printable View

05-25-2011, 04:12 AM
VT-F

How to use fxp?

I have two DSS V6 servers, version:6.0up13.8101.3902 32bit
I want to transfer files between them. They have the same configuration as below:
FXP support is enabled. There's a nas share named "test", its "Use FTP" is enabled.
I login to ftp server with user and password through FlashFXP, when i transfer file test.file(size:5KB) from server A to B, it hangs after FTP command STOR：
[10:52:07] [右] TYPE I
[10:52:07] [右] 200 Type set to I
[10:52:07] [右] PASV
[10:52:07] [右] 227 Entering Passive Mode (192,168,8,176,233,248).
[10:52:07] [左] PORT 192,168,8,176,233,248
[10:52:07] [左] 200 PORT command successful
[10:52:07] [右] STOR test.file

After several minutes, the size of test.file on server B is still 0.
Can any one tell me what's the problem with this?
Thank you!
VT-F.
05-25-2011, 07:36 AM
Ja-B

FXP Transfer worked fine for me with FlashFXP and DSS V6 b5377 . Try first with FTP (no encryption), anonymous mode and activate on both nodes "FXP support" (CONFIGURATION > NAS settings>FTP settings>Show advanced).
05-26-2011, 01:58 AM
VT-F

Quote:

Originally Posted by Ja-B

FXP Transfer worked fine for me with FlashFXP and DSS V6 b5377 . Try first with FTP (no encryption), anonymous mode and activate on both nodes "FXP support" (CONFIGURATION > NAS settings>FTP settings>Show advanced).

I tried this, and it still can't work.
I installed FlashFXP on another computer, FXP transfer worked fine....
Then I reinstalled FlashFXP on my computer, it still can't work...
Maybe there's something wrong with my computer.
Any way, thanks for your help.
05-26-2011, 02:00 AM
Gr-R

Quote:

Originally Posted by VT-F

I tried this, and it still can't work.
I installed FlashFXP on another computer, FXP transfer worked fine....
Then I reinstalled FlashFXP on my computer, it still can't work...
Maybe there's something wrong with my computer.
Any way, thanks for your help.

Firewall ?
05-26-2011, 03:43 AM
Al-S

- Did you try to update your build from version:6.0up13.8101.3902 to a newer build of DSSv6, and test this if work or not.
- Did you try with another kind/type/size of files.
- Do you have any web filter or software that could block the traffic.
05-27-2011, 03:07 AM
VT-F

Quote:

Originally Posted by Gr-R

Firewall ?

It should not be related with firewall on my computer in theory. I tested FXP on another several computers yesterday, and they all worked fine.
05-27-2011, 03:16 AM
VT-F

Quote:

Originally Posted by Al-S

- Did you try to update your build from version:6.0up13.8101.3902 to a newer build of DSSv6, and test this if work or not.

I'll try this later, because my servers are in use right now.

Quote:

Originally Posted by Al-S

- Did you try with another kind/type/size of files.
- Do you have any web filter or software that could block the traffic.

I tested FXP on another several computers, and all of them worked fine. I reinstalled FlashFXP on my computer, but it still couldn't work. This confused me...
I think it shouldn't be related with firewall on my computer.
05-27-2011, 03:25 AM
Gr-R

Quote:

Originally Posted by VT-F

It should not be related with firewall on my computer in theory. I tested FXP on another several computers yesterday, and they all worked fine.

could be if you have firewall locally... make sure port 21 is open, and check for passive settings in flashfxp, you want them off.
05-27-2011, 03:54 AM
VT-F

Quote:

Originally Posted by Gr-R

could be if you have firewall locally... make sure port 21 is open, and check for passive settings in flashfxp, you want them off.

Port 21 on my computer?
I can transfer files between my computer and the server with FlashFxp under both modes: PORT and PASV.