SNMP Sensors Statistics mismatch the Statistics in switch

Hi Folks,

I use Open-E's function "STATUS ->statistics->network" today it show me only
about 100Mb/s. But in my 10GbE switch it show me as following(1.62 Gbps):
===============================================
7124S>show interfaces port-Channel 200
Port-Channel200 is up, line protocol is up (connected)
Hardware is Port-Channel, address is 001c.7308.db0d
MTU 9212 bytes, BW 20000000 Kbit
Full-duplex, 20Gb/s
Active members in this channel: 2
... Ethernet23 , Full-duplex, 10Gb/s
... Ethernet24 , Full-duplex, 10Gb/s
Last clearing of "show interface" counters never
30 seconds input rate 19.5 Mbps (0.1% with framing), 12271 packets/sec
30 seconds output rate 1.62 Gbps (8.2% with framing), 138009 packets/sec
448547262 packets input, 91257547530 bytes
Received 7981 broadcasts, 28906 multicast
0 input errors
4771875937 packets output, 6987077858961 bytes
Sent 40 broadcasts, 60720 multicast
0 output errors
===============================================
Could anyone tell why the statistics are mismatch?

PS.
1.Open-E's screen capture :https://picasaweb.google.com/lh/phot...eat=directlink
2.The bond0 interface was bonding with two Intel Corporation Ethernet Server Adapter X520-2 two 10GbE SFP+ port. Switch is Arista 7124 10G switch with 802.3ad Protocol.

Thanks in advance!

James Chang

I have these cards in our labs, can you tell me what you are seeing when you go into the Console and enter CTRL ALT N then select the 10GbE NIC then go to Info and does it say SPEED 10000

What is the build of DSS that you are using now?

The build version of DSS in using is:
Model: Data Storage Software V6
Version: 6.0up75.8101.5377 64bit
Release date: 2011-05-06

Try without bond and different port on the switch and check the network status instructed from above.