Move DSS lite from US to CD-ROM

Printable View

01-16-2008, 08:09 PM
Samir

Move DSS lite from US to CD-ROM

Hi,
I have installed and tested DSS lite using a USB stick on my laptop. However the system I want to use DSS lite does not have an option to boot from a USB device. Is there a way to move the DDS lite to a CD-ROM and run it from it on that system?
Thanks
Samir
01-16-2008, 08:23 PM
To-M

Currently DSS LITE is only designed for USB-stick.
01-19-2008, 04:55 PM
jimt

alternate install?

I too do not have a USB bootable PC so I took a 40 GB drive and an IDE-USB adapter and installed to the hard drive from my laptop - I then installed the 40 GB drive in a PC and it booted OK. From a different PC on the network I can ping the IP but I can't log in. I can access tools, etc. on the dss PC but not from the network.

Any ideas???

Thanks
JimT
01-19-2008, 06:14 PM
To-M

Does this happen only on this system or any way you can test on another system (make sure to have a the hardware requirments 1GB RAM + 2.4GHz+ CPU). Try reapplying the Gateway and DNS settings from Console CTRL + ALT + N and test with Firefox.
01-19-2008, 06:33 PM
jimt

Alternate install

I tried with another system and was able to get to the login - I get a status notification that I assume is related to minimum requirements - this pc only has 512 mb

I'll try to scrounge up some more ram and try it again

Thanks,
JimT
01-20-2008, 06:04 AM
cyberygan

Quote:

Originally Posted by jimt

I too do not have a USB bootable PC so I took a 40 GB drive and an IDE-USB adapter and installed to the hard drive from my laptop - I then installed the 40 GB drive in a PC and it booted OK. From a different PC on the network I can ping the IP but I can't log in. I can access tools, etc. on the dss PC but not from the network.

Any ideas???

Thanks
JimT

That's very creative, let us know if it works.

All times are GMT +1. The time now is 05:37 AM.