Rocket Raid 2310

Hi All,
I have two DSS unit's I’m setting up, current version 1.32 build 2854.
I’m having troubles with getting the raid card to show up, I’m using a highpoint rocket raid 2310 which is present in the compatibility list.
I have configured a raid array in the card’s bios; I have also tried as single drives
But the card does not show up in the hardware tab, it does however show up in the status tab under hardware.
I’m sure I missing something, obvious!
Also does anyone know when version 5 will be released, since I am setting this up it makes since to get the update installed as well.
Thanks, carter

Try to change to a different kernel (some of the newer kernels will work better with the drivers). Go to CTRL ALT + T in Consol then select Boot Option > System Arch > "TESTING" (single or SMP). Save and reboot. You can test with 1.37 and 5.0 should be ready within the next week or 2. Though if you email me I will provide you access to download the 5.0 release :) to verify as well. If this does not work I need you to send in the log file to support@open-e.com so we can see what is happening.

Hello, i have the same Problem with Version 6.80 an 6.90 ... both of them won't work with High Point Rocket Raid 2310. I also tried this with another PC and other Disks, but the same Problem, opene should start with just one Unit, but i see both of them. I'm thinking about to buy HighPoint Technologies RocketRAID 3220 SATA Controller or HighPoint Technologies RocketRAID 3520 SATA Controller but i won't loose time again, so please let me know if both of them will also work with your newest Version or please give me a hint what i can do to use my Rocket Raid Controller 2310. I'm not looking for an high end Controller it's just for our Test Environment. Greets, Rene