Open-E status messages

hello, running open-E R3 on Intel (SSR212MC2R) dual quad core processor, 4 gig ram, 5 x 300g SAS drives) four drives are R5 and the fifth is a hot spare.
Getting bursts of error messages in the status log as follows:
Within a few minutes got 33 of CMND_RX_START (1636 1 9318XX-4, the XX number increments through the messages. Also withing the same few minutes there were 35 of CHECK_CMD_SN (537) SEQUENCE ERROR (9318xx, 9318A6) again the xx number increments for each message. Then a couple of minutes later there was 1 of EXIT_TX (425) 4072 1 -104 and one of WRITE_DATA_ERROR (411) error -104 @ 0xf010037010040:1

Version is 3.21 DB0000000.2863, rel date 2007-09-27

I'm downloading the latest version at present, but wondering if these messages are indicative of a potential disk failure. We've had one disk fail so far, and the hot spare picked up perfectly.

thanks
Peter

Dude... what is this error message...

It looks like drive.. check your RAID card!!! how old is your system-drive? update their firmware... I found that updates solve maaaaaaaaaaaaaaaany problems

I recommend an upgrade.. ver 46 is stable.. I like it.....

Update and let us know...

Sorry I entered the version number incorrectly -
it's Ver 2.32.DB00000000.2863 Rel date 2007-09-27
All the other numbers were correct.

Joey, RAID card is Intel RAID Controller SRCSAS144e - standard with this system.

Updated tonight to ver 5.0.IE46000000.3090 - will see what that does for it.

Also, has anyone found what causes the Windows system event log entries - iSCSIPrt event 9 and 27?

Didn't fix it. Same errors are being logged.
Will try e-mailing support@open-e.com