Test v6 beta 3 on production server

Hi !

I would like to test latest V6 on my production server.
I will remove v5 dom and use usb key for booting v6 beta .
Is it safe ?

Regards
Alex

Please provide feedback to the forum community:

http://www.open-e.com/beta-dss-v6/

Here is what i get:

2009/06/25 19:11:02 ERROR:No system volume found! System services can''t work without system volume !

Even if I put back the v5 dom.

How can i fix it ?

Regards
Alex

Can you check to see if you are in 64bit mode from the Console Tools CTRL-ALT-T then Boot options then System architecture. Not sure if you had previously set to 32bit mode and now is 64bit. You can change it then save and reboot.

now 64 i was 64
I try 32 and i'll let you know.

Regards
Alex

it says not supported 64bit mode

Switch back and then try to go to the Extended Tools CTRL + ALT + X then select "Default Volume Group" - this will restart the system.

The system is still missing.

but I can see my 2 lv in the volume manager.

Alex

So you can see the 2 LV's from the volume manager - what about your data? NAS or iSCSI?

both nas, the iscsi is on another system

Please read your forum inbox email - i want to contact you to do a webex session to see your screen if possible.