Hi,
I'm trying to update Open-E DSS V6 build5377 to build5626. Can I use ISO CD ?
This machine doesn't have any internet access.
Thanks.
Printable View
Hi,
I'm trying to update Open-E DSS V6 build5377 to build5626. Can I use ISO CD ?
This machine doesn't have any internet access.
Thanks.
Yes you can use ISO Image to update, please find the following steps that should help you:Quote:
Originally Posted by aaragao
Burn the image to a CD using image burning software. Be sure the program burns the bootable iso image to the CD.
You should save your GUI configuration before you do the update.
MAINTENANCE -> miscellaneous -> Function: Save settings
Insert CD into CD-ROM drive
Set Bios to boot from CD
Boot System
When this menu appears select 1
1 Update with current settings kept (default)
2 Update with factory defaults settings
Update will take about 10 minutes
When you see this message
“Update performed correctly, please remove ISO-CD from your CD-ROM and reboot the system”
Remove the CD
Reboot system
Change BIOS to boot from USB drive.
System will boot into Open-e software
Upgrade is now complete.
It doesn't appear that menu, any clue ?
Quote:
Originally Posted by Al-S
Alternatively, you can download the ISO to your PC, from your user portal on our site, then upload it manually to the DSS webgui.
Quote:
Originally Posted by aaragao
You can find the latest builds at :
http://www.open-e.com/account/products-and-updates/
Download the ISO file, and check it with the .MD5 sum file to check that it downloaded fine without any issue.
It gives me error when I try to upload on the GUI thats why I was trying to use a CD. I already check the md5 and I already check filesytem. Any clue ?
Quote:
Originally Posted by Gr-R
What is the error?
Upload failed.
Quote:
Originally Posted by Gr-R
Make sure you have enough space on the boot media to complete the upload, make sure to remove old unused update images.
I checked that and it's ok but the problem persist.
Quote:
Originally Posted by Gr-R
What is the boot media now?
Do you have physical acces the the server?
The boot media is a partition on the disk. I have physical access to the server.
Quote:
Originally Posted by Gr-R
What version are you trying to update from?
seems maybe a clean install is in order.
From build 5377 to last build 5626.
Quote:
Originally Posted by Gr-R
Save your settings and configuration from the webGUI to your local PC, and do a new install using the CD iso.
I have a data volume in the same disk I will not lose this ?
Quote:
Originally Posted by Gr-R
No, unless you manually delete data, it will still be there.Quote:
Originally Posted by aaragao
What is the diference between "settings" and "setup" ? Should I save the "settings" and "setup" to the same file ?
Quote:
Originally Posted by Gr-R
basicly 'setup' file consists of everything you set up in SETUP tab of DSS V6 Web Gui, and accordingly 'configuration' is everything from CONFIGURATION tab. It is always wise to backup both.
The upgrade is done but it complains this is a trial. How can I put my license inside ?
Quote:
Originally Posted by Pi-L
re-enter your product key, at HELP-->About, storage extension area.
It was done already. Now it is working very well. Thanks.
Quote:
Originally Posted by Gr-R