Hy,
Does DSS V7 support VAAI for Vmware ESX 4.1 / 5 ?
If yes what option have we : Block Zero,Full Copy,HW Assisted Locking and Thin Provisionning ?
Thanks
Nsc
Printable View
Hy,
Does DSS V7 support VAAI for Vmware ESX 4.1 / 5 ?
If yes what option have we : Block Zero,Full Copy,HW Assisted Locking and Thin Provisionning ?
Thanks
Nsc
It's planned for first quarter of 2014.( Note: date may get changed without any notification or updates ).
Thanks for this quick response.
Thank you too :).
Is there additional information on this feature implementation?
We will provide this information after Q1 of this year.
Support for VAAI in DSS V7 is done, we are just testing it.
But our QA procedure takes several weeks, so we expect release earliest in beginning of
October.
Thanks for the info.
Found this thread because we were instructed by VMware to turn off VAAI to improve 20+ min boot times: http://kb.vmware.com/selfservice/mic...rnalId=1033665
Should we go ahead and turn off VAAI until the feature is supported? Any update on availability?
VAAI is still being tested with our engineers, they are hoping this will be ready before the end of the year and they want to complete some deeper tests before releasing it.
Any Update? Thanks
more testing is still being done by our QA team. Probably done by year end.
any news? i would really appreciate this feature!
Is there any update that can be provided concerning new approximate timeframe? Been hoping for VAAI support for a while now.
Hi
Is there any changes in VAAI support? From esxi i see only "Zero Status: supported", but the most interesting feature is ATS
Hi
Is there any changes in VAAI support? esxi says that only Zero is supported, but most interesting feature is ATS
VAAI support is being worked on for this year, this will be reported in updates and news updates from our website once it is ready.
Any news on supporting VAAI in DSS v7?
We hope to finish before the end of Q3 if sooner it will be published on our site.
Any update on VAAI support in DSS v7?
Any news on this topic?
Couldn't find anything regarding VAAI support in V7.
This was on hold for the past 2 Qtrs. and is now back in development, we hope to have it before Q4. Please be patient as we have many projects that is being developed but we hope to finally complete this before Q4.
Ok, thanks for the update!
Guys - is there any update on this? Would I be right in saying this has stalled and all development is going into Jovian? I have clients who are asking about this and looking away from open-e because the functionality promised has not been forthcoming.
We did some development work on this and stopped due to the fact that our engineers found that it is better to impalment this with our newer SCST stack but scheduling for this has been pushed back due to other projects. We are thinking of revisiting this in the summer of this year or have it in our DSS V8 product.