thanks Todd!
It's working!!!
There is a OPEN-E version active / active?
Thanks!
Printable View
thanks Todd!
It's working!!!
There is a OPEN-E version active / active?
Thanks!
We are looking into this to have this feature but there is no set date.
Todd,
What is the best configuration with 2 nodes and 4 cards each?
I thought:
DSS01:
eth0: 192.168.0.1 -> Management
eth1: 192.168.1.1 -> iSCSI1 - Failover (Virtual IP 10.0.0.1)
eth2: 192.168.2.1 -> iSCSI2 - Failover (Virtual IP 10.0.0.2)
eth3: 192.168.3.1 -> Heartbeat
DSS02:
eth0: 192.168.0.2 -> Management
eth1: 192.168.1.2 -> iSCSI1 - Failover (Virtual IP 10.0.0.1)
eth2: 192.168.2.2 -> iSCSI2 - Failover (Virtual IP 10.0.0.2)
eth3: 192.168.3.2 -> Heartbeat
ESX iSCSI:
Connect with 2 vmkernel to 2 iSCSI IP for redudancy -> 10.0.0.1 e 10.0.0.2
What do you think?
thanks!
Yes this is good but check my notes:
DSS01:
eth1: 192.168.1.1 (Set the Aux for this Primary Node)-> iSCSI1 - Failover (Virtual IP 10.0.0.1)
eth2: 192.168.2.1 -> iSCSI2 - Failover (Virtual IP 10.0.0.2)
eth3: 192.168.3.1 (Set the Aux) -> Heartbeat
DSS02:
eth1: 192.168.1.2 (Set the Aux for this Secondary Node)-> iSCSI1 - Failover (Virtual IP 10.0.0.1)
eth2: 192.168.2.2 -> iSCSI2 - Failover (Virtual IP 10.0.0.2)
eth3: 192.168.3.2 (Set the Aux) -> Heartbeat
mmmhhhh!!!! I don't understant... :confused:
...and my eth0 card????
Where is?
thanks for your patience..!! :rolleyes:
eth0 is the management NIC so no need for me to address it and I wanted to make sure that the other NICs have AUX enabled when using w/ Auto Failover. This also noted in the "How to resources and the Auto Failover video from the links below.
http://www.open-e.com/library/webcasts-and-demos/
http://www.open-e.com/library/how-to-resources/