Changing LAN IP on DSSv7

Hello Open-E users,

We have the need to change network addressing of our LAN. The auxiliary paths will not change (remaining in their own VLANs).
Is there a special procedure to achieve this ?

I suppose :
(obvious prerequisite: configure new IP subnet, and DNS)
1- Shutdown all VMs
2- On Windows, remove all iSCSI targets
3- Stop Failover on both nodes
4- Change IP on eth0 on both nodes (reboot required, I guess)
5- Pray, then restart Failover
6- Reconnect iSCSI targets with new IPs
7- Restart VMs

Does it seem a good roadmap ?

Thanks in advance

Xavier

This is correct, but I would make sure that you update to the latest then enable Maintenance Mode then change the IP's (please make sure the VIPs are on a separate network as instructed from the setup of Failover). This video will show you how to enable Maintenance Mode.

http://www.open-e.com/support/librar...rs-and-videos/
Maintenance Mode with Open-E DSS V7 in Failover with iSCSI and NFS