USB boot ISO

Printable View

01-30-2008, 06:11 AM
billeuze

USB boot ISO

I saw in the DDS forum http://forum.open-e.com/showthread.p...light=usb+boot that there exists a "USB BOOT ISO assist the USB DOM incase of BIOS not assisting the boot from the USB DOM"

Is there any way this ISO can be made available to DDS Lite users? evan for a price?
01-30-2008, 03:10 PM
To-M

Check your email for access to this. This ISO BOOT CD was designed for DSS and R-3 version and not tested with DSS LITE.
01-30-2008, 11:51 PM
DSTAVERT

I have the same problem. Is it possible to get the ISO as well.

Thanks
01-31-2008, 04:42 AM
billeuze

OK, I tried the USB boot ISO. Although it does seem to work with the DSS Lite, it doesn't do what I want it to do. It does not work with a motherboard that doesn't already recognize the USB module.

I tried on 4 diferent old mother boards that will not boot from USB - well the CD boots and everntually presents a message saying: "No USB module found" and that's as far as it gets. And yes the flash drive was plugged in to the USB slot and the light was on indicating it had power at least.

I also tried it on a newer laptop. I set it to boot from CD and it did and then continued to load the DSS and I got the console screen telling what my IP address is etc, so that worked. But what's the point - that laptop boots just fine straight off of the USB module without needing help from the CD. I suspect this helper CD is for certain cases on newer machines that do see the USB drive directly but just don't allow it to boot.

If anyone figures out how to boot and use the USB module on a machine where the bios doesn't see the USB disk. I'd sure like to find out how you did it.
02-06-2008, 11:36 AM
FACT

ISO to boot DL380 G3

I have the same problem. Is it possible to get the ISO as well?

Thanks
06-19-2008, 11:37 AM
holmcde

Hallo,

I have the same problem. Is it possible to get the ISO as well.

Thanks
10-14-2008, 05:41 PM
mhilbrand@vrz.net

Boot CD

Hello Todd

I have the same problem... HP Proliant DL380 G3 does not support booting from USB :(

Could you please send me the ISO image (or link)?

Thank you very much

Maxemilian
10-14-2008, 10:35 PM
Sh-J

Dear Maxemilian,

Please, check your e-mail. I sent you the link for the image.

Regards,
SJ
10-30-2008, 07:50 PM
CaS

Hi Sh-J, I need the cd iso, could you send me the link?

Thanks and Best Regards,
Max
11-03-2008, 07:28 PM
Sh-J

Dear CaS,

I sent you an e-mail, please check it and reply back please.

Regards,
SJ
12-12-2008, 12:17 PM
grunt

Usb Iso

HI ,

USB ISO supported boot from USB ( Kingston 2GB ) ?

please download link for USB ISO.

USB ISO is tested on DSS DEMO ?

Thanks
12-15-2008, 11:46 AM
beng

G'day Grunt,
The DSS Lite is offline until at least January, so even if you get the key creator it won't activate.
If you download the Demo CD it will run for a while, just don't make more than 1TB available to DSS. Otherwise when you revert to DSS Lite in Jan, it will not work.

Not sure what you are asking with "USB ISO is tested on DSS DEMO ? "

Cheers Ben
01-27-2009, 03:48 AM
Harvin

Quote:

Originally Posted by To-M

Check your email for access to this. This ISO BOOT CD was designed for DSS and R-3 version and not tested with DSS LITE.

Hello Todd,

Is the ISO still available? I want to use this on an order system that barely even know what USB is.

TIA....
01-27-2009, 04:07 AM
To-M

Sure, send me an email and I will direct you :)
01-27-2009, 05:38 PM
Harvin

Quote:

Originally Posted by To-M

Sure, send me an email and I will direct you :)

Is there a way for me to send you an address without posting it in the forum?

Thanks
01-27-2009, 07:55 PM
Harvin

Quote:

Originally Posted by Harvin

Is there a way for me to send you an address without posting it in the forum?

Thanks

Strike this I figured out how to send it privately.
01-27-2009, 08:10 PM
To-M

sending this to you in a few min.
03-13-2009, 05:19 PM
dirtdart

I'd like to get a copy of this if possible.
06-18-2009, 12:55 AM
wakkara

I hope this Thread is Still alive

Hi there people, i have just received a Proliant DL380 G3 Server and I want to install some OS on it,

But it doesnt have dvdrom.
So is there a way to Boot from the USB port some ISO? If so How can this be done.

Thanks for the Support :)
08-07-2009, 09:37 PM
Carlangas

DL380 G3 boot from usb

I have read that there is a solution to boot from USB on these machine. Could you send me ISO?

Someone says that he needs a solution to boot a DL380 G3 without DVDRom, I only know one posibility, to install an USB Floppy, perhaps a USB DVD will work but I'm not sure.

Regards.
08-18-2009, 08:56 PM
borstl20

DL380 G3 boot from usb

Hi,

I got the HP DL380 G3 working with the CD ISO and an external DVDROM Drive, but not with the original Open-E USB Flash Drive. Also see http://forums11.itrc.hp.com/service/...readId=1184004
Is there a way to boot from a selfmade USB Flash Drive (can be another Drive) using the existing License Key of our bought USB Drive?

Thanks for Help.
08-25-2009, 09:04 PM
masim

Yes, you can download the zip files on any USB stick. Or with V6, you can create a partition and install it there... It worked for me!! :)
08-28-2009, 10:01 PM
Br-R

@masim

It looks like @borstl20 need some manual how to do it :)
I can prepare such doc. but "this action" require some time (Unfortunately I have several more important tasks ;/ ).
But I will really appreciate if You describe how You do it :)
09-09-2009, 08:01 PM
Mjah

Hello,

I Also want to use a HP DL360 G3. but iam not able to get it installed on te raid container.
Could someone also send me some information on where i can download the Boot iso. To use DSS lite.

Thnx !!!
09-09-2009, 08:12 PM
To-M

Sent to your forum email inbox.
09-09-2009, 08:38 PM
Mjah

Todd,

Could u check your pm..The remote path doesn't seems to be right.

thnx!!!
09-09-2009, 08:44 PM
To-M

Sorry about that - check now.
09-10-2009, 08:56 AM
Mjah

I know there ain't any support for the USB boot iso. But could someone point me in the right direction to get it to work? I boot with the boot iso true iLO. I got a USB stick plugged into the DL360 with Dss Lite on it. Still i get the error "NO USB Flash device found"

Thnx !
09-28-2009, 03:57 PM
borstl20

Hi Br-R,

do you have an existing Quick-Manual for me to Install DSS in a Partition on the local Diskarray using CD-ROM as Installationsource and the License Key from the Open-E USB Drive Key?
I think thats the best way for me.

Thanks
10-01-2009, 01:33 AM
jvloyola

same problem proliant dl380 g3

I have the same problem: I got a proliant DL380 g3 and need to install a new op system that is in dvd format.

Can you please provide the files?

Thanks

Vinny
11-02-2009, 07:59 AM
harryw

Quote:

Originally Posted by To-M

Sorry about that - check now.

Hi.

Could you also send me the link to the ISO as I have an IBM x-365 which is unable to boot from a USB device ?

Regards,

Harry W.
11-09-2009, 05:13 PM
masim

Harry,

If you want the DSS LITE, here is the link

http://www.open-e.com/get-dss-v6-lite/

make sure to register first...
01-20-2010, 11:15 PM
ptabashov

USB boot ISO

Can I get the USB boot ISO? I need to boot HP Dl360 G3 with DSS5 - I do have the USB nodule, but the BIOS doesn't seem to support the USB boot.
Thanks.
01-21-2010, 01:04 AM
To-M

What about installing a 2Gb LUN on the RAID Array or another internal Hard drive (IDE, SATA or SAS..).
01-21-2010, 04:38 PM
ptabashov

Well, I need to use DSS v5, not v^ and it is not installabe, right? I did manage to DD from USB DOM to the LUN and it seems to be working, but talks about activation - what do I need to do about it?
Ideally I would still prefer to use CD + USB DOM combination if possible.
01-21-2010, 07:11 PM
To-M

DSS V5 can be but you will need to submit a support ticket. Also you have this posted in the DSS Lite section of the Forum.
10-22-2010, 12:37 AM
dblwizard

Boot ISO

I have the same problem. Could you send me the link to this ISO?

Thanks
10-22-2010, 12:54 AM
Gr-R

Quote:

Originally Posted by dblwizard

I have the same problem. Could you send me the link to this ISO?

Thanks

Login to your user portal here: http://www.open-e.com/account/login/
And download the latest version.
You can download an ISO image file and burn it to a CD, or download the zip file and flash a USB drive. There are readme files included.
11-26-2011, 08:33 AM
berryla

This ISO BOOT CD was designed for DSS and R-3 version and not tested with DSS