-
Demo CD not working
I have downloaded the NAS-XSR demo - File demo_54.20060822.308.b2137.xsr-ent.iso
Prob 1 - If I try to burn the iso to disk on windows I get an error. I can burn it on linux. - is there a problem with this iso ? I get the same result using the demo_18.20060111.180.b1410.nas-ent.iso and demo_10.20060309.300.b1654.xsr-smb.iso Iso's
Prob 2 - Using the burn from linux I boot the server (the same server will boot the iscsi-ent demo cd) it hangs at the Open-e graphic and will not continue from there.
Any Ideas?
Thanks
-
Demo CD not working
Prob 1:
Please verify the download file size and MD5 check are correct.
For NAS-XSR Enterprise 270.MB.
demo_54.20060822.308.b2137.xsr-ent.iso 270.0 MB
demo_54.20060822.308.b2137.xsr-ent.iso.md5
Try to set the CD burning file system properties to use ISO9660.
Prob 2:
This could be caused by system resources. The necessary hardware requirements are as follows:
- 1 GByte RAM
- CPU ( 2,8 GHz or faster)
- Ethernet card
- IDE Port
Also please review our site for product compatibility listings.
http://www.open-e.com/data_storage_s...bserv=prodcomp
-
response
I redownloaded the file and while it says its downloading a 270MB file I only get 146MB
I checked the MD5 key and its different.
key for one downloaded is 6decec04537927c562a530981c8f533
The system is a Xeon Dual core, 2Gb Ram, Dual 1Gb Intel Nics, Supermicro MB with IDE and 3ware 9550 16 port SATA Raid
If you can give me a direct link to the download I will try it
-
Demo CD not working
I will check this out to see if there is an issue and get back to you today on this. Please try again sometimes there might be some routing issues.
-
Demo CD not working
I wanted to follow up with you on the download issue. I experienced the same problem as well. I would suggest trying again later, as work is being done on the server or there could be a temporary routing problem.
-
I was able to get it downloaded - Now when it boots I don't get an option to change the network cards. This Motherboard combo worked great for the iscsi cd. I have the supermicro x7dbe-o board with 2 onboard intel gig nics. The hardware display at the console show 2 Intel 631xESB/632xESB DPT Lan Controller Copper Rev (1) nic's
Any Ideas?
-
Demo CD not working
This will also be updated in our next release from the Supermicro X7DVL-E-O
and the Supermicro X7DVL-E-O motherboard as we are seeing more of these in the market. You are definitely working on all the hits! :)
We appreciate this kind of due diligence.
Thank you!
-
So should I wait for an updated build?
-
I would and for other ideas I would contact the North America support line - you will reach a human speaking engineer (770) 881-7680 .
-
Demo CD not working
I have an update for your Supermicro on the NIC issue. Please email me at todd.maxwell@open-e.com so I can send this to you.