canot change NTP and Time Zone
I am working with DSS6 lite and am having trouble with the NTP settings. The GUI will not change the NTP server or Time Zone. I can change the NTP server at the console but not the Time Zone. This is pretty simple stuff but I cannot seem to get past it.
Any help would be tremendously appreciated.
Thanks Don
Well I can change them but they go cback
The GUI lets me change the fields to what ever I want but the GUI resets the NTP server and Continous Check box back to the System console setting and leave the time zone set to Europe/Berlin.
No matter what I do I cannot control the time zone.
This may be related I am trying to use the NAS function. I am getting "Time differences between NAS and KDC are too large"
and
Cannot renew kerberos ticket
I have the time set to manual and it is within a couple of seconds of the domain controller.
:confused:
Don
I also wanted to add that I am on 6.0up07.xxxx.3537 2009-08-21 b3537
I also wanted to add that I am on 6.0up07.xxxx.3537 2009-08-21 b353. I have installed and licensed two instances one on VMware and one on a Dell 2800. Both installs have the time problem. So it not hardware. If I enter the valid IP address of an NTP on the hardware console the unit will get a time but the time zone is wrong. I think this is a bug. I wish eopen would let us download older versions.
i booted in 32 bit mode and had the same results
I thought the x32 might be different than x64