Hallo,
i'm trying to use High Point Rocket Raid 2310 (which is presented in the open-e compatibility list) with open-e 6.90 but it won't work with any RAID. You see all units in open-e, bu there should be just one unit, the raid unit ... no matter what i try it won't work. Rocket RAID 3510 is working perfect. Please let me know if there is something i can do, to get my Rocket RAID 2310 Controller working with open-e 6.90.
Kind Regard, Rene
The Lite version does not support hardware RAID, please use the full version.
http://www.open-e.com/products/open-...v6/comparison/
Thank You ! ... but now i don't unterstand why my two other open-e Lite Versions are working with two different RAID Controllers, without creating a Software RAID:) ?
What kind of controllers?
And are you sure it is really Lite version?
Yes for sure, the Lite Version:
... I can sent you screenshots if you like !
These three are working:
HighPoint Technologies, Inc. Unknown device 3510 (rev 09)
3ware Inc 7xxx/8xxx-series PATA/SATA-RAID
Adaptec AAR-2410SA PCI SATA 4ch (Jaguar II)
These cards may show up under the STATUS -->Hardware; screen in the webGUI, simply means the PCI database is picking them up.
If you navigate to SETUP-->H/W RAID, do you have functionality?
Yes, you're right, i know that you can't manage the Raid Controller under SETUP-->H/W RAID. With the RAID Controllers i above-mentioned I have more then one HDD connected and after building the RAID, there is just one Unit with the size of the RAID, so i think it's working:) And with High Point Rocket RAID 2310 you don't see just one Unit, you cann see each HDD as one Unit. And this is my Problem, so what i can do to fix this ?
Kind Regards, Rene
You will have to create software RAID.
Ok, thank you ... and please edit your HCL ... Rocket RAID 2310 ist not working.
http://www.open-e.com/service-and-su...-technologies/
It does work with the full version(which your link points to).