It seems that you have installed the DSS on a boot medium and it takes all the disk (boot medium) size.
The best would be if you run the DSS from a USB stick or get a second hard drive, or if you...
Type: Posts; User: Al-S
It seems that you have installed the DSS on a boot medium and it takes all the disk (boot medium) size.
The best would be if you run the DSS from a USB stick or get a second hard drive, or if you...
We recommend to update the V6 to build up98 (or after) first then go with the upgrade process to V7.
As it's more recommended to upgrade your system from newer v6 builds. For the mentioned steps,...
The following video should help you:
It's about " Tuning iSCSI Target settings for ESX ", and you can find it at the following link:
https://www.youtube.com/embed/gz5lkdoYsFY
Please make sure that all your systems has the same date/time ( sync the time between all the systems so there should be no big difference in time, max difference should not exceed 5 min. ).
And...
What is your DSS build, your RAID controller firmware, and did you checked your RAID controller BIOS settings, if it reports anything?
It could be a Firmware issue. And we recommend you to open a...
You may find some useful videos and PDFs at the following links:
http://www.open-e.com/service-and-support/library/how-to-resources/...
Try:
Username: raid
Password: raid
Username: aac
Password: raid
Username: aac
Password: aac
For more details about snapshot, please find the following links:
http://kb.open-e.com/Snapshot_159.html
http://kb.open-e.com/Snapshot_153.html...
Please find the following KB:
http://kb.open-e.com/Expanding-HW-RAID-units-connected-in-a-SW-RAID-unit-on-Open-E-system-does-not-work_19.html
Hello Michael,
Please send us the Serial Numbers for your systems and we will send you back your product keys, you can open a support ticket and our team will help you.
For more details, you...
Broadcom BCM5719 and BCM5720 are already supported by DSS v7 latest builds, (support for them start from build up02 and after as you can see that in the HCL list) so please try to use a newer DSS v7...
The gateway and DNS will be needed for NTP server. And with the Continuous adjusting, using the NTP option enabled on your system, time will be monitored and corrected if the difference between the...
You didn't mention the running build, but in general, the modules do a registration to them selves when start dealing with the system and it's kernel, so such messages should be just a notifications...
Please find the following KB link, it should help you:
http://kb.open-e.com/Default-Volume-Group_136.html
If that doesn't help, then please give us more explanation with details about your issue.
Could you please give us some more details.
Welcome you back!
The Lite version support up to 2TB of storage capacity
and you can find more details bout it at the following link:...
Try to read the following KB, it should be useful for you:
http://kb.open-e.com/How-can-we-setup-the-primary-node-restart-the-iSCSI-Failover-and-make-this-node-active-again_1053.html
Open-E Data Storage Software is a Linux-based data storage software used for building and managing centralized data storage servers - NAS and SAN.
Open-E products (DSS v6 and DSS v7 for now ) are...
westm003, thank you for your update.
Try to restart your Apache as the following KB steps:
http://kb.open-e.com/Blank-webGUI_1613.html
If that does not help, then try to install (run) DSS from another new USB stick and see if that...
As an update, please keep in mind when using latest builds of DSS, MaxBurstLength variable cannot be set to 16776192 because such value was only supported in iSCSI Enterprise Target (IETD),...
And please keep in mind when using latest builds of DSS, MaxBurstLength variable cannot be set to 16776192 because such value was only supported in iSCSI Enterprise Target (IETD), additionally With...
Our system is not a tool or an add-on application, our system is an operating system with a lot of functions in it, and if you are looking to install DSS on a Windows OS, then you may install it as a...
Try to enable the Disk Cache, and if you have a CacheCade option in the card, try to disable it's options and see.
Also is your LSI running with the latest Firmware? if yes try to downgrade it to...
What is your RAID controller mode/type ? and are you enabling the Write Cache or not? ( try the opposite, if you are turning it on then try to turn it off or turn it on if it's already off).