Search:

Thanks for the answers.
What i did... Attached another hdd and create vg01 on it. i made it default system volume from C-A-X extended tools. Then i could see iscsi target menu on gui instead of no...

How can get system logs. Always get message from gui ...There is no system volume...

Raid controller is ok. Raid situation is optimal. Open-e sees raid disk without problem.
There are no snaphots as i remember. But i deleted them if there are exist...to be sure..
Fsr says that no...

I read the article it does not say to much...I can only select vg00 and its already selected... According to lvm restore menu there are 6 restore points. First 3 shows vg00 and they were already...

We have dss with 40 tb iscsi target unit working under lsi raid controller.
After a proper restart system started to give error : no system volume found..services can work without....We cant get...

Finally we did it. Problem was raid5. We destroy raid and replaced by raid50. Now reading is 700 mb/s. Writing is arround 280 mb/s. Also if the client macpro has macos 10.5.7 everthing is ok with 700...

i updated atto fc en82 driver, bios, manager etc.. Everything is uptated. On open-e side qle2562 bios was 2.02 then updated it too 2.10. I started to believe that atto and qlogic cards does not...

I tried with 4gb on both sides but no difference. Target dssv6 uses qle2562 and initiator macpro uses atto fc en82. At target side i have only 2 gb ram. can it be the reason of poor performance. Or...

@R3vo
Thanks for the answer.
I am using dss V6 latest version.
My connection between the fc cards adjusted auto. i will try with 4 gb then write here the result.

I have excatly the same problem.
My configuration
Supermicro X8sax mainboard
intel xeon 5504 processor
2 gb ram
supermicro 24 bay chasi with 16 seagate 1 tb sas disks(7200 rpm) Raid5
qlogic...