Search:

Would the same setup work for NFS with the NFS Failover module?

Presumably the DSS volumes should be populated with high rpm SAS rather than SATA drives to fully utilize the 10GbE bandwidth?
...

Thanks. Will give it a try.

Hi ,

Does anyone have success using DSS V6 where DSS V6 joins Domain A which has a one way trust with Domain B.

Then allow systems that logins to Domain B, to be able to access shares setup on...

I've found that disabling the synchronous NFS settings of DSS greatly improves the performance. For an Open-E software raid, it is possible to achieve between 15~20MB/sec sequential write of 256K...

Hi Beng,

Thanks for sharing. Didn't try normal NFS...have only tried it with ESXi.

But there's certainly a lot more appeal with ESXi on NFS if performance can scale to 50~60 MB/sec range. The...

7


Hi nightmare99,

The firmware on all the drives are SD15. Googled, but didn't seems to see any problems reported for 1TB, though the 1.5TB drives have problems between SD15~SD17, based on...

Hi Todd,

Yes I'm able to see all the drives and their status from the BIOS...but not from the 3DM2 web interface...

I seem to get only about 1MB/sec write...

Wonder if anyone else have tried...

Hi,

Has anyone encountered the issue where the controller is unable to display the drive status correctly?


Firmware SD15
Reallocated Sectors 0
Power On Hour 0
Temperature 0°C...

Hi

Has anyone tried ESXi with DSS-NFS volumes? Any performance issue? I understand from the Open-E VMWare best practise that it is supported.

Rgds,
Kok-Hong

Hi Beng,

That may be so...but gathering benchmarks figures for the 9550SX, it seems possible to get 200~300 Mb/sec for RAID5 volume. In light of that, a 40Mb/sec iSCSI performance seems to suggest...

Hi Torpedo,

I've changed some BIOS settings, selected Enhance SATA and Intel RAID and found that the system was much faster, able to reach between 20%~30% of GbE for iSCSI. That's a more...

I had been testing DSS lite on 2 different hardware and seems to be getting dismal performance of around 2% of GbE when transfer a single 1Gb file from a T60 with GbE connection on XP-SP2 to the...