Search:

hey netkey

can you download the system log files and sent them to support ?

I suspect this may be a memory issue;

to test memory you will need to reboot the server

To run the memtest,...

Set the frame size the same on both ends.
then run some TESTS.

it will vary depending on what's in your network

hey sweety

what version are you running ?

Hey diablo 45

It hard to tell you what to use as each network is different.
best thing to do is to try different settings and run performance tests.

Hey Sweety

It may be a filesystem error :(
need to check dmesg.0 or dmesg.2
can you post them?

may want to send logs to support to confirm.

just remember to run a memory test before...

try using firefox, and clear the browser cache

what version firmware do you have on the SuperMicro x7dbe?

HI
try these steps in this link
http://forum.open-e.com/showthread.php?t=1380&highlight=replace+disk+drive

try changing back to 64 bit then delete the nas volume C-A-T

check the available free space you have left
I've seen some wierd things happen when I fill the drives.

did you check time,
did you check the ads post in the knowledgebase

Try this link:

http://www.open-e.com/account/register/free-trial/

Hey 1parkplace

before you changed to block I/O did you get and cmd_abort (1143) errors?
did going to Block I/O fix this?

I had a problem like this

I had the used a duplicate lun numbers on the Vmware side


check the link
http://communities.vmware.com/message/701181#701181

check out techfrez's directions post in this thread

http://forum.open-e.com/showthread.php?t=1793&highlight=update

What verson are you using ?

here is a link on how to update
http://www.kb.open-e.com/How-do-I-perform-a-Software-Update_44.html

try using firefox
clear the browser cache

As far as I know you cannot update the lite version

It is possable with data replication
not possable with volume replication

did you try clearing the browser cache
is the time correct?

There is a utility in the console
c-a-x or c-a-t

I've used the USB 2 and fat 32
i have seen some post in the past about incompatable usb drives.

what is happening is that open-e writes a serial number on the disk to keep track of them
when you broke the raid 1 by removing the disk, the software was expecting a new disk drive to be added back...

I am not sure of your setup but
if you have an empty drive bay in your system
you could use it to perform your backups to a single drive
(or one drive for each day of the week)

I have tried...