Actually the total amount of space is well under 1 TB. There are 2 x 300 GB in a RAID 0, plus 4 X 73 GB in a RAID 5, for a total of 600 + 200 = 800 GB. After switching to a completely different card,...
Type: Posts; User: peterlu
Actually the total amount of space is well under 1 TB. There are 2 x 300 GB in a RAID 0, plus 4 X 73 GB in a RAID 5, for a total of 600 + 200 = 800 GB. After switching to a completely different card,...
So the cache is enabled, as it should be. As for memory, the system has 3 GB of RAM, and from the console tools, it looks like there's about 86% free.
How do I access ifconfig or hdparm? That is,...
I've not gotten everything working just fine with the MegaRAID card (AMI QLA12160 = Dell PowerEdge RAID Controller 3/DC). I've been doing a bit of performance testing, and with HD Tune (I realize...
It's definitely the Adaptec. I had a spare (older) Dell PERC3 dual-channel (an old LSI MegaRAID card). I swapped that in place of the Adaptec 2200S, and things appears to be working properly now......
It's definitely something with the card. I unplugged one of the SCSI cables from the Adaptec 2200S, and plugged it in to the onboard SCSI controller on the motherboard, and it identified and...
dmesg, part 2 of 2:
Simple Boot Flag value 0x87 read from CMOS RAM was invalid
Simple Boot Flag at 0x7a set to 0x1
* This chipset may have PM-Timer Bug. Due to workarounds for a bug,
* this...
dmesg, part 1 of 2:
Linux version 2.6.17.13-vs2.0.2.1-smp-6oe2 (root@develsystem2) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #18 SMP Wed Dec 5 18:12:14 CET 2007
BIOS-provided...
Thanks for the ASM instructions. It works just fine, and I can see both of the RAIDs I created from the other machine; the properties are all as they should be.
I'm not sure what specifically to...
Thanks for all of your help.
I took out my CD drive when I installed all of the hard drives, so if a CD could be avoided at the moment, that would be good (though I can move hardware around if...
Under "Status->Hardware" it lists "Adaptec 2200S (Vulcan)" under "RAID Controllers" in the upper part of the list.
Under "Drivers Info" it lists a whole bunch of entries: SCSI target core;...
Please pardon my idiocy, but I'm a complete newcomer to iSCSI. I have a Dell Workstation that I'm trying to set up as an iSCSI target. I have a bunch of hard drives that I've set up in RAIDS on an...