Visit Open-E website

Search:

Type: Posts; User: cyberygan

Search: Search took 0.00 seconds.

  1. We use Dell rig. SC1425 with single 3.2GHz CPU,...

    We use Dell rig. SC1425 with single 3.2GHz CPU, 2GB RAM, Adaptec 39320 dual channel SCSI U320, and Dell 220s storage. We originally configured 220s as split bus and used both channels on the 39320....
  2. Thought I should report back. 14 x 73GB works...

    Thought I should report back. 14 x 73GB works with 1TB license. Raw space, no hardware RAID. It's a good news.
  3. I certainly hope that Open-e would use this...

    I certainly hope that Open-e would use this accurate number. However, at least no hard drive manufacturer uses it. :D
    I will go ahead and order 14 x 73GB HDD, and we shall soon find out.:)
  4. Sorry for the slightly OT post, but does anyone...

    Sorry for the slightly OT post, but does anyone know if 1TB means 1,000,000,000,000Byte here? Because I am planning to use 14 x 73GB, which is 1,022GB. TIA.
  5. Is there a way to transfer image from USB stick to USB DOM?

    We have a registered copy of Lite 2T on a 1GB USB stick, we just received the shipment of 512MB USB DOM today, is it possible to transfer the Lite to that DOM? Thanks.
  6. Replies
    8
    Views
    13,048

    We have no problem with that, since it's...

    We have no problem with that, since it's documented now.:)
  7. Replies
    8
    Views
    13,048

    That's what I understood. But my previous GUI...

    That's what I understood. But my previous GUI password contains ^, it worked with GUI, but not on console. Basically, if I set administrator password in GUI and it contains ^, the console password...
  8. Replies
    8
    Views
    13,048

    And console access is same as remote access?

    And console access is same as remote access?
  9. Replies
    8
    Views
    13,048

    Todd, your quick response makes my head spin. :D ...

    Todd, your quick response makes my head spin. :D
    I left my GUI open in a brower window, so I was also able to unlock the console and set the password in GUI.
    One note I would like to make is that...
  10. Replies
    8
    Views
    13,048

    Console password reset

    I remember the default console password is admin. I had a unsuccessful reset when trying to unlock the console, apparently there was certain characters LITE didn't like. Now the console is locked,...
  11. Replies
    7
    Views
    6,721

    We are happy with 60000K/s, it's a backup device...

    We are happy with 60000K/s, it's a backup device on S/W RAID5, and we can get over 40MB/s average on NFS, which is impressive enough. :)
    What puzzles us is that we have to enable Intel RAID on M/B,...
  12. Replies
    7
    Views
    6,721

    I think I should report back. I first ran...

    I think I should report back. I first ran SeaTools to make sure all HDDs are good. They all passed tests. Then I messed with BIOS settings a bit, it was in default settings. I tried to enable the...
  13. Replies
    7
    Views
    6,721

    All hardware are new, no RAID mode is set in...

    All hardware are new, no RAID mode is set in BIOS, plain SATA only. GUI shows all 4 HDD with S/N. Is it possible that ICH9R is not properly supported? It's quite new.
    Thanks Todd for the prompt...
  14. Replies
    7
    Views
    6,721

    Software RAID creation issue

    We are using Supermicro X7SBi M/B, Pentium E2160, 1GB RAM, 4 Seagate 500GB SATA. We created software RAID5, after that, MD0 status shows,

    RAID LEVEL RAID5
    Creation time Mon Jan 21 01:30:41 2008 ...
  15. Replies
    5
    Views
    5,279

    That's very creative, let us know if it works.

    That's very creative, let us know if it works.
  16. You do mean 'will'? You didn't miss the word...

    You do mean 'will'? You didn't miss the word 'not'? That will be great news.
    So I can use the file downloaded earlier, and install later? If yes, this is indeed great news. The product itself has...
  17. Did some testing, LITE isn't for production

    Main concern is the activation, since I have many hardware parts laying around, I thought I should do the

    public service and answer some questions.

    I used a P4 (Intel M/B Perl865k, onboard...
  18. So what parts are allowed to be changed?...

    So what parts are allowed to be changed? Different NICs? Bigger HDDs? Faster CPU?
  19. Replies
    1
    Views
    6,150

    Where to buy PQI USB DOM?

    Where to buy PQI USB DOM? And is 512MB enough? I can find Transend, but I am under the impression that PQI lasts longer, is that right? TIA.
  20. Replies
    5
    Views
    6,929

    Is IDE DOM supported?

    Is IDE DOM supported?
  21. Replies
    3
    Views
    5,699

    Thanks for the prompt answer. And is this new DSS...

    Thanks for the prompt answer. And is this new DSS module being shipped to us free of charge or we will have to pay for it? :confused:
  22. Replies
    3
    Views
    5,699

    Product warranty

    We have tested demo-CD and are impressed. We are ready to purchase DSS module. But yesterday, my USB flash drive quit working. This makes me nervous. If we are to spend $1,000 for this product, what...
Results 1 to 22 of 22