Thanks Todd. For some reason new posts were not showing up when I refreshed my browser today. Perhaps some stale cache somewhere.
Type: Posts; User: tim.lsr
Thanks Todd. For some reason new posts were not showing up when I refreshed my browser today. Perhaps some stale cache somewhere.
It seems there have not been any new posts since 2017-09, is this forum still active?
Hello,
A simple technical question:
If I create multiple Units either with software RAID or hardware RAID and then combine them into one Volume Group, is the data spanned or striped across the...
Ahh, then my mistake was performing a rescan before the PV_resize, as that is what took the unit offline and put it in an "unsupported" state, correct?
Hello,
We added drive space to our HP array on DSS and used the ACU CLI to resize the logical drive. Upon completion of the resize process on the HP array, a unit rescan of the drives in DSS now...
I am a SecureCRT user and was about to install PUTTY as the default SecureCRT settings did not send the key-presses required to trigger ALT-CTRL-R. Digging a bit deeper into SecureCRT settings...
Hello,
We are trying to set up a HP DL370 G6 server with Open-E. The software installs fine, but none of the integrated 1 gbit network ports on the NC375i card show up as configurable. The two...
We are using:
Model: Data Storage Software V6
Version: 6.0up65.8101.5217 64bit
Release date: 2011-02-28
Updates: N/A
I believe that is the latest.
Unfortunately clearing the logs...
This peak of 10 M after a reboot (two actually) is accurate then?
http://downloads.cortex.net/DSS-iostats.jpg
If it is accurate, then I would have to assume the system is hitting the cache on the...
Hello,
After re-booting our DSS system, the iostats on our primary volume have gone through the roof - 10 M or 10 million. This would be great if it were realistic, but it is not and now this...
I have a similar question related to VPD 1 vs 2. It seems the behaviour of VPD 2 is to reply back with all IP addresses including the one we use for management. We don't want this IP to appear in...
We have been using Open-e DSS V6 in our clustered ESX environment for almost a year now. From my perspective DSS is as reliable as any other solution. You would have to implement a 2 node cluster...
I thought I would share my experience here as it may be relevant to others using DSS.
The short answer = ENABLE the write cache BUT set the WRITE CACHE to 0% via the HP CLI. [ctrl slot=0 modify...
Sorry for the Homer Simpson moment. I experienced a case of not reading the fine manual close enough and discovered the errors of my ways. I understand now that I need a boot device separate from...
Hi All,
I am evaluating DSS V6 on some older hardware that we have kicking around that I thought was supported by what I read in the hardware compatibility lists. Here is what I am running and...