Hi,
sorry for the delay, but it was really a hard way :-(
We have replaced the Adaptec Controller - w/o success
We have replaced all Harddisk, even with different models - w/o success
We have...
Type: Posts; User: babbnase
Hi,
sorry for the delay, but it was really a hard way :-(
We have replaced the Adaptec Controller - w/o success
We have replaced all Harddisk, even with different models - w/o success
We have...
Just a short update.
We have created a case at Adaptec.
They are current checking the logfiles.
I'm not sure, but current I would rather name the Controller the root cause, or the combination...
Hi,
I removed the 2610A, so current only the 6805 is installed.
I have also moved the harddisk to another slots (if the backplane is faulty, or the cable).
Booted DSS from USB
Applied patch...
Hi,
I have now rebooted with rescue_mode=no_mount_lv
The system booted completely.
please find the new logfiles...
Hi,
I have now rebooted with rescue_mode "enabled"
DSS hangs on "restoring_base_settings start"
BTW: write cache was enable for the 6805, but not for the 2610A. I have now also enabled write...
Hi,
Please find a new log here:
https://noc.all-tld.net/downloads/DSS/Events_HDD_switched.txt
As you can see, again HDD 7 is not responding.
As I wrote before, I had switched HDD 7 with HDD...
This message is confusing me :-(
I have enabled write cache on both controller (during boot while creating the RAID Volumes).
No glue, why the message named wr cache disabled
I will check it...
Hi,
I have switched HDD 3 with HDD 7, and created a new RAID 10.
Afterwards, I have installed DSS complete new.
Please find the first logs here:
https://noc.all-tld.net/downloads/DSS/
...
until now, I haven't contacted Adaptec, cos I had no problems before.
All the hardware is new, and as I have not seen the 6805 in your HCL, we have tried to use CentOs as storageserver.
I was more...
Hi,
I had to reinstall DSS, because we had done some test with CentOs.
I have now reinstalled DSS:
created a vg - w/o any problems (sorry, we had never a problem w/ vg; my mistake, it was...
Hi,
thanks for the super fast reply :-)
The Adaptec is to the latest firmware.
We have also tried with CentOS (had to build our own aacraid.ko modul) and configuration by hand. In this case...
Hi,
does anybody has tried DSS with an Adaptec 6805 controller ?
We have tried Open-E DSS V6 ver. 6.00 up75 build 5377, which should support the new controller.
We can also see the Raid...