two 16tb and one 14tb. No support contract. Best offer takes all.
Type: Posts; User: webguyz
two 16tb and one 14tb. No support contract. Best offer takes all.
Have three DSS V6 licenses for sale. Two are 16tb and one is 14tb. Total price is $1500.00 or best offer for all three.
Email me at webguyzv [at] gmail.com if interested.
Was wondering if anyone running DSS V6 has upgraded their Xenserver to 6.1. Successfully did mine yesterday but getting something different. I use MPIO and in Xencenter it says I have 2 out of 3...
One advantage to smaller units is if you lose an entire volume then a smaller number of users are affected. Had a RAID 10 volume lose a drive and while rebuilding, its mirror pair drive died. Lost...
So does this mean all work on DSS 6 comes to a halt?
Using LSI 9260 with RAID 10 and the default was weekly. Really beats up the system and takes several hours so I scaled it back to monthly. Same thing with the Patrol test that checks the hot spares....
I have ten 1tb RE4 WD's in a raid 10 (~4.5 tb usable). Using a sata DOM for open-e OS. Seems a waste to use 2 drive slots just for the OS. I am using the 9260 LSI controller as well. I do have...
Is this a production server? or are you in testing phase? if testing you might try using raid 10 instead of raid 5. What disk controller did you say you were using and how much cache does it have. I...
using Dell 6248 with Gigabit ports. You need to make sure if using Jumbo Frames that its supported by your switch. Make sure your packets are not getting fragmented. Use something like this test from...
So no worries as long as we are not use ESX. Good to know. Thanks!
payment or free is the same as far as base functinality of xenserver goes. Prefer MPIO to bonding because you can get close to 2 gig throughput, but in bonding your still only getting 1 gig max...
What if we already have installed 6156?
6.0up95.8101.6156 64bit
Is this going to be a problem?
What model disk controller? Do you have Jumbo Frames enabled? Did you tweak the ISCSI target settings as described in various threads in this forum? Getting between 52 MB/s - 89 MB/s depending on...
Just out of curiosity did you have the boot volume on the raid array, or was it a separate usb or sata dom?
How about a 40 gb SSD drive connected directly to the SATA port on the mother board. Cheap and dependable. I thought there was very little that gets written to the DSS volume after it boots up so it...
All better. The procedure I outlined above was followed and it worked perfectly. Both DSS's are up and autofailover back in service. MPIO is a butt saver when it comes to never having your customers...
After thinking about it I will probably have to drop my virtual IP's to do this but I first must rebuild the secondary DSS volume from scratch and recreate the vg0 and the lv's and targets. I use...
Have 2 DSS's with RAID 10. The secondary DSS had a single drive go bad and immediately after that it was unable to read the source drive to do the rebuild to my hotspare. This took my secondary DSS...
Trying to understand what benefit an appliance like this one is. What do you use for data storage?
You have the Auxillary checkbox checked for failover nics as well as the replication connection on both sides? I remember having a similar error once when I forgot to check the auxillary checkbox on...
If your talking about a LUN as those in ISCSI you have to use a ISCSI Storage Repository and attach the DSS to it. When it completes attachment it will tell you it needs to format the DSS for...
I had the drive die in my Primary DSS (DSS1) and everything switched to Secondary (DSS2)
To fix this I had to make DSS2 (now secondary) to be the primary and DSS1 (now primary) become the...
Working with Open-E support on this. Having to rebuild my primary DSS after losing the drive.
Ok, Have primary/secondary DSS V6's and the autofailover worked great after my Primary DSS had multiple drives die and basically lost my entire volume. So everything is running on Secondary DSS and...
Hey, got it up to 200 MBs!!
In addition to making sure the settings were set as above, I had to stop the replication tasks and restart them. It appears that once the tasks start they use whatever...