Visit Open-E website

Search:

Type: Posts; User: To-M

Page 1 of 20 1 2 3 4

Search: Search took 0.04 seconds.

  1. Replies
    2
    Views
    155

    Did you run the ""Repair Filesystem""? If so then...

    Did you run the ""Repair Filesystem""? If so then you might have an issue with the boot media and run a check disk scan from Windows. Or test with a USB Flash stick and see if boots
    ok then if it...
  2. Thread: Additional JBOD

    by To-M
    Replies
    1
    Views
    214

    You can add JBODs as you want for your capacity...

    You can add JBODs as you want for your capacity growth needs all that you would need is to add additionally storage licenses if needed if your base is lower then what you added.
  3. Replies
    3
    Views
    766

    Check the tests.log from the log file and check...

    Check the tests.log from the log file and check the ifconfig -a section and see if the MAC Addresses are the same.
    Also go to the Console screen and enter CTRL ALT N then change the Gateway there...
  4. You would need to submit a support ticket with...

    You would need to submit a support ticket with details (iSCSI or NFS) as to how this script would look like for VMware.
  5. Thread: DSS wont boot

    by To-M
    Replies
    3
    Views
    1,391

    Did you perform the steps from my last post? I...

    Did you perform the steps from my last post? I can assure you that there is nothing with the build or we would have heard from 1000's of complaints. See link below where I have asked others to look...
  6. Yes you can but if that does not work then you...

    Yes you can but if that does not work then you might want to re-install with the latest build. Remember Up12 is over 4 years old.
  7. Replies
    3
    Views
    1,363

    I do see your images of the disk groups that are...

    I do see your images of the disk groups that are not links. The reason for the forum admin to approve is to prevent spam and other junk links. We had issues in the past and it is better controlled...
  8. Replies
    3
    Views
    1,363

    Check the zfs log file from the Node-2 server and...

    Check the zfs log file from the Node-2 server and see if there are errors and also the sys-error log as well. Any chance you can upgrade to up26 on Node-2 to see if you move the Zpool over to Node-2.
  9. The only thing we have is in the Console screen...

    The only thing we have is in the Console screen for performance test but it will only give Read and Writes performances. Its located in the Console enter CTRL ALT W then select "System benchmarks"....
  10. That can work as well.

    That can work as well.
  11. Replies
    5
    Views
    1,826

    No worries!!! If something where to happen I...

    No worries!!! If something where to happen I depend on the forum users to let me know if something is happening :)
  12. Replies
    5
    Views
    1,826

    Not sure if your searching but this was...

    Not sure if your searching but this was yesterday. So we respond.
    http://forum.open-e.com/showthread.php/4512-Volume-Group-with-Multiple-Units-Striped-or-Spanned
  13. I would not recommend this due to the fact that...

    I would not recommend this due to the fact that if 1 of the joined arrays in the Volume Group had an issue it would take down the whole Volume Group until it is fixed creating an outage during...
  14. Are you running the latest build Up60?

    Are you running the latest build Up60?
  15. Thread: MSM Please!!

    by To-M
    Replies
    5
    Views
    2,136

    I dont know the exact firmware build that...

    I dont know the exact firmware build that Broadcom has but for sure update to the latest then reboot to see if that helps. Also there is a new version of the DSS V7 up60 that you can update as well...
  16. Thread: MSM Please!!

    by To-M
    Replies
    5
    Views
    2,136

    It was updated recently due to the latest release.

    It was updated recently due to the latest release.
  17. Thread: MSM Please!!

    by To-M
    Replies
    5
    Views
    2,136

    See link for MSM for the build your running with...

    See link for MSM for the build your running with the DSS V7.

    http://kb.open-e.com/Unable-to-connect-to-HW-RAID-using-Megaraid-Storage-Manager-MSM-software_2861.html
  18. Are you on the latest build? You might want to...

    Are you on the latest build? You might want to stop the Replication tasks and try to restart them again.
    If that does not work and if possible stop the failover and stop the replication tasks and...
  19. If the 2nd node has to be completely rebuilt then...

    If the 2nd node has to be completely rebuilt then you will need delete the replication tasks from the Primary and once the Secondary is ready then reconnect and recreate the tasks again. Deleting the...
  20. You will need to make sure that the replication...

    You will need to make sure that the replication task will be deleted and recreated again and that it is synced from the Primary side. You will need to start the Failover again though so be aware of...
  21. This is a N-Way node cluster, currently we have...

    This is a N-Way node cluster, currently we have only 2 way node cluster. We will be working on this N-Way cluster feature with the JovianDSS most likely first part of next year.
  22. Replies
    1
    Views
    1,565

    Is the Virtual IPs on a different network then...

    Is the Virtual IPs on a different network then the physical IPs of the NICs in the DSS? Does this happen with other VMs as well? We would need more information on the DSS for its hardware and how the...
  23. Replies
    74
    Views
    23,613

    Check your inbox.

    Check your inbox.
  24. If you are adding a new server with new Volume...

    If you are adding a new server with new Volume Group and Logical Volumes then your will need to delete the tasks and re-create new tasks for the new volumes for that newer server and mark the volumes...
  25. Hi Daniel, Use the Maintenance mode, see this...

    Hi Daniel,

    Use the Maintenance mode, see this video it will for sure answer what you need to do, as we show with VMs (its faster then real machines for live Webinars) but we show the feature on...
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4