No you will NOT lose your license when doing this.
I think if you update to the latest release you will be ok as the PCIe cards should work and the SFP as well.
Type: Posts; User: To-M
No you will NOT lose your license when doing this.
I think if you update to the latest release you will be ok as the PCIe cards should work and the SFP as well.
I forgot to add look for the "mrmonitor.log" as well if using any of the LSI/Avago/Broadcom controller. Areca and others will be listed but in a different name but you will be able to see them except...
Hi Oli - When using a RAID controller for the drives you have to create the RAID Array to your Volumes you will not get SMART info, this only works for Software RAIDS with DSS V7 or JovianDSS. Now...
If the system was doing well in the past then recently there are performance issues there could be a disk that is having some issue. 1 disk having some Write or Checksum errors will cause this. Check...
Can you try to remove the IP info of the mirror path or remote host? You can re enter that information and start up the Volume Replication.
The meta data for the other volumes will be there so it...
This can be the result of the RAID array issues. If you have no available slots for another drive then is there any SATA ports on the Motherboard that you can place a SSD drive with small capacity?...
Yes those are listed on our HCL. See link below from our HCL....
So its the same Realm name you use on up66? Is so then download the up66 build or roll back to 66 from the GUI and reboot. Like I said we had a case where the ADS had to be rebooted for it to work...
With PDC not working possibly the boot media but not sure without looking into the logs from support that you can submit. If the DSS version up66 works then I would use that as the up70 does not have...
Yes use RID!!! So now test with PDC option, what your doing here is just to see if you can import the Users and Groups with entering the IP of the ADS server and the Admin and Password. IF that does...
Are you on the latest build up70? Make sure in the DNS settings to point the ADS IP in the DSS V7. IF timing is ok not over 5 min then ok. Are you in the same network, you most likely are but...
Was it working before? Was there any changes made to the network? Any other errors showing in the Event Viewer?
Can you with another Domain Admin account? Can you restore from your past...
Yes we should update that doc you have seen, use only use 1 IP address per NIC for MPIO as this will provide Path Failover and Performance. This should be used with any OS to Storage.
Most likely you are having some hardware issue (Drive, Backplan,Cable....). Look in the ZFS.log to check the drives and syserror log as well. If you cant find anything submit a support ticket and we...
DSS V7 and the JovianDSS are NOT effected by this Log4J, we sent out an email to all registered Open-E customers.
https://www.open-e.com/newsletter/img/PartnerExclusiveENver1_23911_12.jpg
...
I have not herd of anything about ARECA :( sorry man!! I would reach out to them BUT make sure to watch our website to get updated.
We are working on small update and new full-build as we want to be 100% it will not effect our customers. We will announce this on our website as well for all to download Devs and QA hope to have it...
I would agree that it should work without and issue. Can you update the firmware on the Motherboard to see if that works as those NICs are 1GbE.
I have seen this issue in the past and it can be something with the boot media or the tasks that are present in the system even though all is working fine but with that message "Check your internet...
If your trying to install the DSS V7 on a USB drive with Windows 10 make sure you have formated the USB using with Windows and NOT something from another application. Also make sure you run the...
I know what you mean Tony!!
The XFS is the underlying filesystem.
NFS v4 will not be supported in DSS V7. We will have this in our JovianDSS product this year. Only NFS v3 will work with DSS V7. There where many reasons why we did not implement this in DSS V7 and...
It is true that over 90% of our sales is related to the JovianDSS product. We will still be making one more release for DSS V7 for updates and drivers but for new features and development this will...
See link below for installing the DSS V7 as a VM.
https://www.open-e.com/support/library/webinars-and-videos/?page=8
Open-E DSS V7 Quickstart Apr 30, 2013 ...
The MegaRAID Storage Manager application you specify the IP Address not the DSS V7. And yes you want to use the GUI management NIC. The issue your having is that the MSM is picky!! Not the DSS V7. So...