I have cleared favorite list and entered IP_mgmt manually in "IP address" field and then select "Discover Host" button.
Nevertheless, LSI MSM doesn't report (in "Remote Servers" list) LSI RAID...
Type: Posts; User: sale_u123
I have cleared favorite list and entered IP_mgmt manually in "IP address" field and then select "Discover Host" button.
Nevertheless, LSI MSM doesn't report (in "Remote Servers" list) LSI RAID...
I have similar problem with LSI MSM.
As long as we had Open-E DSS v6, remote LSI MSM could connect to appropriate mgmt IP on storage and logon to LSI RAID controller inside storage.
Now, when we...
Hello,
We have one customer which is (still) using DSS V5 b3518 in 32-bit mode with 32-bit (volume groups) iSCSI targets and NAS_shares.
This storage was working for about 3 years without any...
As far as I know, LSI controllers supports 2 kinds of checking:
Patrol Read
Checking selected (or all) HDDs by reading all sectors. When bad sector is found, data from it is moving to another...
Try CTRL+ALT+P from console.
It will restore factory administration settings (including access password)
Our customer has experienced quite low performance when clients access NAS volumes through 4x 1Gbps NICs in bond.
Open-E DSS V6 b5845.
LSI2108 RAID controller with 2x RAID6 volumes consists of...
Hi Pi-L,
User portal doesn't let me to open new support ticket for this trial product.
Let me know, how can I open new support ticket for trial product?
Our customer is planning to purchase Open-E DSS V6 storage, so we have gave him trial 60days DSS V6 b5845 to test it (installed on the server)
Of course, trial prod key has been obtained, and...
@fiprotec
I don't have much experience in NFS sync.replication, but I think it is similar to iSCSI volume sync.replication.
You want to access the date from secondary DSS2 storage which is...
So, what is the solution of this problem:
- for new Open-E DSS V6 installation we should enter product keys without "-". Am I right?
Although, PDF with purchased product key (received from Open-E...
I think what RONIS want to say.
Let's say that primary storage gone off-line suddenly (power outage, UPS failure...).
Content of RAID write cache is safe since there is BBU installed.
But, the...
Hello,
As far as I know, still it is not possible to have 2x WIndows 2008 servers in cluster plus 2x iSCSI Open-E storages in iSCSI failover.
ONE Windows 2008 plus 2x iSCSI Open-E storages in...
Hello,
We are interested in fully redundant system based on Windows 2008 Hyper-V cluster and storage cluster (iSCSI failover replication). No single point of failure.
Since Open-E still doesn't...
Hi shechtl
We are very much interested in Your 10Gbps switchless configuration of iSCSI failover (2x DSS in iSCSI failover) and 3 esx4 servers.
Can You share with us Your network diagram of...
I think that you can't do it from Open-E interface.
SMART status in Open-E is available only for directly attached HDDs (without any RAID controller in between). Or, when RAID controller is working...
Hello,
We are using Open-E DSS V6 b4786 64-bit on Supermicro HW.
2x iSCSI logical volumes (5.5TB each) on 2x volume_groups of the same capacity.
Total of 11TB of data. LSI1078 based SAS RAID...
@dwright1542
You can regularly shutdown Open-E DSS V6 server by short pressing
of power button on front panel of the server.
This is similar to sending of "Graceful Shutdown" command to the...
We have Open-E DSS V6 4TB b4622 64-bit which is activated and registered for almost one year.
It is installed on LSI SAS RAID10 2GB boot volume. The rest of RAID10 is used as another RAID10 volume...
Hello,
Does anyone have small update for Open-E DSS V6 for “TCP network test” under CTRL+ALT+T console ?
I really appreciate if anyone can give me an FTP address where I can find it.
...
To-M, thanks
I agree with webguyz.
Adding some kind of short description for every ethx in console view, would be very helpful.
We have practice to rename "Local area Network Connection..."...
Is it possible to "imitiate" synchronous iSCSI Volume Replication over LAN by cheating the system by setting destination IP equal to source IP (and other parameters)?
Just an idea.....
I have already tried synchronous iSCSI Volume Replication with failover over LAN according to How-to-resource procedure from Open-E.
This solution implies 2x storage HWs and 2x Open-E DSS V6.
I...
I am using Open-E for over two years, but I still have some difficulties to identify NICs adapters in Open-E DSS console.
As You allready know, console is providing us a list of available NIC...
Thanks, Symm
Agreed.
But, I thought that "Multiple H/W RAID Controller Support is not checked out" means that Open-E DSS V6 lite supports limited number of HW RAID controllers (not many as full...
Does Open-E V6 lite support only SW RAID or it supports HW RAID controllers also?
For example, 3WARE 9650SE-4LPML?