Problem solved.
I could restore it manually.
Thanks
Paul
Type: Posts; User: zernik
Problem solved.
I could restore it manually.
Thanks
Paul
Hi,
I have a problem with a new DSS USB module I got this week from open-e support after the old one got corrupted with the message: 'System Corrupted No USB flash module has been found'.
The...
Hi Ben,
appreciate your help. I access the NAS via SMB. NFS is off.
All pings were successfull. Some of them are longer than 1ms:
Antwort von 192.168.0.1: Bytes=32 Zeit<1ms TTL=64...
Here is the post again, bold was displayed in white color:
Hi Sh-J,
indeed, in the tests.log there is an entry for that:
eth1 Link encap:Ethernet HWaddr 00:30:48:8A:59:E1
inet addr:192.168.0.1 Bcast:192.168.0.255 ...
Hi,
after running the open-e DSS for over two years now, sind 2-3 weeks I got a performance issue. The problem is, I cannot describe since when this issue really exists.
I made all the updates...
the log looks like this now:
ClamAV update process started at Tue Apr 1 18:10:09 2008
Reading CVD header (main.cvd): OK
main.inc is up to date (version: 45, sigs: 169676, f-level: 21,...
Hi Todd,
I'm using the 5.0.DB42000000.3007 version. And the funny thing is that it all worked fine already in the past. I can also ping swith.clamav.net
Is there any chance to manual update...
As mentioned above: "I can exclude network problems as open-e dss updqtes can be downloaded from the GUI. Also I can send out testmails." Ping is also possible. The Problem is with ClamAv. See the...
Hi,
the automatic ClamAv updates doesn't work any more. All worked fine for months but now since few weeks there are always update errors.
I can exclude network problems as open-e dss upadetes...
OK, everything works fine again :-)
Only the IP Adress, password and the server name were changed. Also some other settings like shares were not restored completely. After updating the system...
CONFIGURATION LOST after Update to 5.0!!!
Hi, after the manual update to 5.0 all the configuration of dss is lost. The Ip adress is reseted to 192.168.0.220, the password is also reseted to 'admin'....
Hmmm, yes ok. But why do I get the error message? The update from 1.32 to 1.37 worked fine for me from the web interface. Now, It doesn't work.
What's the issue there?
Hi, when I try to upgrade to 5.00 from DSS web interface, I got the following error message after clicking the "Übernehmen" button:
"Fehler
Das Update konnte nicht entpackt werden."
What's the...
Thank you.
wish you a nice week!
When do you think to release the 5.0?
The 'next week' is already two weeks ago :-)
Do you have the newest version of DSS? With the prevoius version of DSS I had no problem either.
With Firefox I can see the messages...
It's IE 7 on vista.
IE...
That's why I had the other problem above, too.
Paul
But now I have another problem...
After the update, I have problems with the error message functionality. I can see that there are any messages, but when the message window opens, I can't see...
OK, I got it. It was the installed certificate in IE from open-e. It seems that the old certificate was not the same as after the software update. But IE only showed that the page couldn't be...
No chance from any browser. I can ping the server on 192.168.0.1. On the default 192.168.0.220 and 192.168.1.220 there is no response.
The share is still accessable, I can deal with the data on it.
Hi,
today I updated the DSS by using the online update service to 1.37. After the installation I clicked the reboot button and waited few minutes. Now, I can't access the GUI any more. The IP...
Hello,
what would you recommend as the best USV solution to work with NAS-XSR SMB? Do you have good or bad experinces with any models?
Another question: When do you expect to provide the...