System Volume is missing

[hbarthel]

Hello,

I have an DSS Version 5.0.DB44000000.3025.
After deleting the existing Raid6 and creating a new Raid5, I reboot the System.
Till this I get the Message: "No system volume found! System services can't work
without system volume !"

In the Web-GUI the "old" Volumes where still available, when I have delete the Raid-Sets
on the Controller.

How can I create a System Volume, or better how can I reset the whole configuration.

Regards Heiko

[To-L]

You can restore your system volume from select default volume group in the console tools.

[tecksin]

You can restore your system volume from select default volume group in the console tools.

This founction should be in "Extended Tools".

[alex1]

i have the same problem with two new striped raid 5 sets, all on a new tyan s2927 and 3ware 9650 8lp, i have tried to restore default system volume, and remove the lv001, nothing works, even resetting to factory default settings does not completly reset the dss dongle. how can i clean the memory and start again.

[To-M]

If you want to remove the Volume Groups then go to Console and enter CTRL + ALT + X then select Delete content of units. But if you want to remove the Logical Volume then you can do this from the GUI just make sure that there are no running tasks associated with the Logical volume. This is if you have no data on the Volume Group and you wish to remove this permanently.

[alex1]

hi Todd Maxwell, please can you please specify in a little more detail the exact motions of doing this via the web interface?