Lsi Megaraid Sata Ii 300x-8

[Ercosys]

I forgot:
*-----------------------------------------------------------------------------*
ifconfig -a
*-----------------------------------------------------------------------------*

eth0 Link encap:Ethernet HWaddr 00:30:48:79:5E0
inet addr:10.0.0.200 Bcast:10.0.0.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:669244 errors:0 dropped:0 overruns:0 frame:0
TX packets:5744245 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:948912030 (904.9 MiB) TX bytes:419638425 (400.1 MiB)
Base address:0x3000 Memory:dd300000-dd320000

eth1 Link encap:Ethernet HWaddr 00:30:48:79:5E1
inet addr:10.0.0.201 Bcast:10.0.0.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:8576954 errors:0 dropped:0 overruns:0 frame:0
TX packets:626987 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:4282156554 (3.9 GiB) TX bytes:78363728 (74.7 MiB)
Base address:0x3040 Memory:dd320000-dd340000

eth2 Link encap:Ethernet HWaddr 00:04:23:AF:2F:00
inet addr:10.0.0.202 Bcast:10.0.0.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:5981255 errors:0 dropped:0 overruns:0 frame:0
TX packets:627633 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:367457688 (350.4 MiB) TX bytes:79418583 (75.7 MiB)
Base address:0x4000 Memory:dd640000-dd660000

eth3 Link encap:Ethernet HWaddr 00:04:23:AF:2F:01
inet addr:10.0.0.203 Bcast:10.0.0.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:720098 errors:0 dropped:0 overruns:0 frame:0
TX packets:627016 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:1033922350 (986.0 MiB) TX bytes:78329063 (74.7 MiB)
Base address:0x4040 Memory:dd660000-dd680000

my ifconfig seems to be ok, no dropped packets.

[toepytoe]

Try these settings

maxRecvDataSegmentLen=262144
MaxBurstLength=16776192
Maxxmitdatasegment=262144
maxoutstandingr2t=8
InitialR2T=No
ImmediateData=Yes

[Ercosys]

Tried all but is always slow. How can i set up MPIO? Is there a How-To ?