Test v6 beta 3 on production server
Hi !
I would like to test latest V6 on my production server.
I will remove v5 dom and use usb key for booting v6 beta .
Is it safe ?
Regards
Alex
Please provide feedback to the forum community:
http://www.open-e.com/beta-dss-v6/
All the best,
Todd Maxwell
2009/06/25 19:11:02 ERROR:No system volume found! System services can''t work without
Here is what i get:
2009/06/25 19:11:02 ERROR:No system volume found! System services can''t work without system volume !
Even if I put back the v5 dom.
How can i fix it ?
Regards
Alex
Can you check to see if you are in 64bit mode from the Console Tools CTRL-ALT-T then Boot options then System architecture. Not sure if you had previously set to 32bit mode and now is 64bit. You can change it then save and reboot.
All the best,
Todd Maxwell
64bit
now 64 i was 64
I try 32 and i'll let you know.
Regards
Alex
64bit
it says not supported 64bit mode
Switch back and then try to go to the Extended Tools CTRL + ALT + X then select "Default Volume Group" - this will restart the system.
All the best,
Todd Maxwell
Same problem
The system is still missing.
but I can see my 2 lv in the volume manager.
Alex
So you can see the 2 LV's from the volume manager - what about your data? NAS or iSCSI?
All the best,
Todd Maxwell
both nas, the iscsi is on another system
Posting Permissions
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
Forum Rules