Raid 6

[pgs]

Hello!

How I can create RAID6?
I have 10 SATA hdd 750Gb.

Raid BIOS Console (Ctrl+G) allows to create only RAID0, RAID1 or RAID5.

[To-L]

What RAID controller do you have.
Seems like it's not supported in your controller
If your RAID controller does not support RAID 6 try software RAID with the Open-E software.

[pgs]

I have raid BIOS Console activated by Ctrl+G key after POST completed.

If I delete all raid in this RAID console, reboot NAS, and go to the web interface (Open-E NAS-R3), log in with full access, go to SETUP->S/W RAID page, i see warning:

Warning
No units found.

How I can create any RAID, if "No units found."

Sorry for my bad English.

[symm]

You may need to change the disk to JBOD (just a bunch of disk) in the RAID controller BIOS.
What raid controller are you using?

[pgs]

NAS server: Intel® Storage Server SSR212MC2
(http://www.intel.com/products/server...2-overview.htm)

RAID Controller: Intel RAID Controller SRCSAS144E
HDD: 10x750Gb SATA

[pgs]

P.S. I dont find JBOD parameter

[pgs]

Anyone help me?

My NAS server: Intel® Storage Server SSR212MC2
HDD: SATA 750 Gb x 10
RAID Controller: Intel RAID Controller SRCSAS144E

How do I create Software RAID6?

Problem: Open-E NAS R3 on "S/W RAID" tab, on web interface, does not show installed (10 units) disks.

[To-M]

What version of the NAS-R3 Enteprrise are you running. Latest version is 5_0_up47_build_3200.

Also have you tried using the MegaRaid Storage Manager?