Visit Open-E website
Results 1 to 4 of 4

Thread: Redundant controllers using Adaptec 5445

  1. #1

    Default Redundant controllers using Adaptec 5445


    I was planing on building a Supermicro based DSS box using dual Adaptec SAS-5445 controllers ( Do you have or plan on having drivers supporting this setup in Open-E ?

    Rasmus F

  2. #2


    Currently We do not support the Adaptec 5445 RAID controller.
    We are awaiting drivers for that card.

  3. #3


    It is listed in so is it only the reduncance you do not support or is the hardware list listing it by an error and the controller not usable at all at this moment ?

  4. #4


    It is the redundancy that we do not support.
    The Adaptec 5445SAS is supported as we have customers using this card.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts