Visit Open-E website
Results 1 to 2 of 2

Thread: Upgrade failure

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1

    Default Upgrade failure

    Afterupgrading I can no longer connect to the DSS. I can ping the SAN but can not connect to the server remotely. The LUNs show up but are unstable and the problem appears worse after being logged on for a while. I tried to reboot it by going into rescue console but that fails with "Internal System Error, 60 Seconds to Shutdown".

    Any ideas what is goping on and how I can fix this? At this point I will try just about anything.

  2. #2

    Default

    Try to reflash the module with CD by following the instructions below:

    1. Burn ISO image onto a CD
    2. Boot from CD with the Open-E module inserted
    3. Take option 1 and then thehe update will automatically reflash the module
    4. Once completed remove the CD and re-boot with the module

    If this does not work, please let us know.
    All the best,

    Todd Maxwell


    Follow the red "E"
    Facebook | Twitter | YouTube

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •