Thanks, Todd.
So once I take the auto-failover off, that will break/disable the virtual IP causing each volume that is connected to a server to "break" until the VIP is re-enabled by turning the failover back on.
Member
Thanks, Todd.
So once I take the auto-failover off, that will break/disable the virtual IP causing each volume that is connected to a server to "break" until the VIP is re-enabled by turning the failover back on.
Administrator
Actually you are stopping the Failover Manager from the GUI SETUP -> network -> iSCSI Failover -> Function: Failover Manager that stops or starts the auto failover. VIP should still be on unless ping node is pointing to the other server by the way a good ping node would be a ups in case others wanted to know.
Posting Permissions
Reply With Quote